Many users, in order to improve their hardware, often ask themselves: is it possible to install RAM from different manufacturers? The answer to this and many other questions on this topic will be given below.
RAM generation
In the market of computer components, the generation of DDR3 RAM has long been a leader. After 800 megahertz from DDR2, the next step was a breakthrough, breaking the line into gigahertz. Undoubtedly this is the most universal RAM, as it can work on computers of medium size, as well as in a gaming computer.
There is another species that appeared relatively recently - it is DDR3L. The peculiarity of the new bar is that it is low-voltage, that is, it consumes yes 20 percent less electricity, working with a voltage of 1.35 volts.
Such a bar can completely cope with a system sharpened for DDR3, but not the other way around. There are processors that simply do not support the 1.5 volt standard. The combination of strips is also undesirable, since the system will work with the same voltage.
So is it possible to put RAM from different manufacturers? Despite the fact that many motherboards support two generations of RAM at once, they are not compatible with each other. You must install either one view or another.
As for mobile devices, laptops, the question is whether it is possible to put RAM from different manufacturers on a laptop, the answer is no. The fact is that laptop straps are best purchased paired with an average volume, or one with a large one. For reliability, you need to find out the capabilities of the motherboard.
Timings and frequencies
If everything is clear with the generation of RAM , is it possible to install RAM from different manufacturers and frequencies?
So, it is worth considering first of all the option with different manufacturers. The most common manufacturers in the field of RAM are ADATA and Kingston. Experts in the field of computer components recommend that users pay more attention to factory assembly. The fact is that the brackets that are sold in pairs or in a quartet have been tested together, they are ideally suited to each other and work perfectly in pairs using multi-channel streams.
The possibility of combining from different manufacturers cannot be ruled out if the frequencies coincide. Just the memory, under the guidance of the controller, will select the optimal frequency for the strips from different manufacturers. Usually, a bar is selected whose frequency is lower in terms of performance. Based on the information provided, it is clear whether it is possible to put RAM from different manufacturers.
Possible connections
Firstly, a lot depends on the capabilities of the motherboard, on which there are slots for RAM. It is necessary to find out a few points:
- Access to RAM overclocking.
- Available RAM size.
- The number of slots available.
The first point is focused on the game audience, where overclocking of RAM is simply necessary. After installing the brackets, you need to go into the BIOS and set the necessary parameters.
The second paragraph answers the question: "Is it possible to put RAM of different manufacturers and different sizes?" Yes, slats of different sizes can safely function with each other. The main thing is to correctly calculate the timings and frequencies.
Most standard motherboards have four slots for RAM slots, and all of them support multi-channel operation. In the third paragraph, the emphasis is on filling the memory slots. If you fill in all four slots, then the system will spend more time processing four channels. For this reason, it is worth using a win-win option - this is to install two strips of 4 gigabytes. Two channels will not take a lot of time to process data, and 8 gigabytes of RAM can easily be enough to work with games.
The consequences of an incorrect installation
Incorrectly selected RAM strips can lead to doubts about whether it is possible to set RAM from different manufacturers. If you do not follow the advice of manufacturers and experts in this field, then you can come across such undesirable consequences as a system failure to start.
If during installation you exceed the maximum memory capacity, then the system may simply not use the remaining RAM memory. For this reason, it is worth checking with the manufacturer of the motherboard the permissible size of RAM.
The same applies to frequencies, if the system does not support overclocking, then you will have to be content with low frequencies.
Conclusion
Summing up, it is worth agreeing on whether it is possible to set the RAM of different manufacturers. When assembling a gaming computer, do not ignore the advice of specialists. Their advice will help ensure maximum productivity gains without damaging the system.