Many found themselves in such a situation when you need to get into the apartment, but there is no key to it. And, of course, few people know how to break the lock, and what is needed for this. Such tricks are often shown on TV. It seems to us that all this is very complicated. However, experts who own this secret convince everyone that this is within the power of everyone. The main thing is to know which tool to use.
What you need to open a door without a key
Of course, only a thief or emergency tamper knows how to crack a door lock. This will require not only special master keys, but also certain skills. Special manuals on this subject have already been issued today. This kind of material is widely distributed on the Internet. Therefore, practical skills are not so difficult to acquire. Only three months of serious studies are enough - and any person will absolutely calmly master how to break the lock on the door. There are situations when there is no need to make any efforts in order to open the door. You just need to buy special equipment. It should be noted that the tools are quite cheap, they can afford many people.
Open the padlock
All locks are classified by installation type. They can be overhead, mortise and mounted. First, find out how to crack a padlock. Such a barrier is considered one of the most affordable. No tools are needed for this. It is enough to apply serious physical force. You can also take a crowbar or crowbar. A couple of strokes - and the road is open. But the disadvantage of this method is that you can seriously scare the neighbors. If you operate silently, you will need a special master key and a few seconds of free time.
Overhead and mortise locks
Such a barrier requires much more time and effort. Lever locks are considered one of the most resistant, because they have a large number of locking pins. But they can also be opened quickly enough. One of the most reliable is considered cylinder and rack. However, experts are absolutely sure that there is no difference in the form of the product. Any of them can be dissected within 15 minutes. Many thieves know very well how to crack a castle with a secret. For these purposes, you will need a special device and perfectly honed craftsmanship. Then no obstruction will become a problem.
Cylinder locks
Such products can provide a very high level of security. Their accuracy is very high, the five-pin design has approximately a million combinations. Although such locks are made by a large number of different companies, all of them have key wells of various shapes.
Therefore, do not worry that your door can be opened with a foreign key. Recognizing such a castle is easy enough. You can just look into a key well. Inside it is a round pin. It happens that you can see the border between the upper and lower pins. It goes in line with the wall of the cylinder itself. Those who do not know how to learn how to break locks of this type need to master the tool well.
A hand with a master key should feel that the tension has eased, holding on to a specific pin. And the hand in which the rotator is located should feel that the pair has begun to succumb, to go out onto the very line of separation. Throughout this procedure, it is very important that both hands feel exactly how the elements rotate inside the lock. Those who master this well will not be difficult to cope with the task without a key.
Hack the pin lock step by step
For such an operation, you need a master key. It must be carefully inserted into the well with the hook up. But this is only on condition that the lock is installed correctly, and not vice versa, as is often the case. To be sure of this completely, just look into the keyhole and find the latest pin. After that, you can continue the operation. The standard model has five pins. Before the first, as a rule, the distance does not exceed 1 inch.
Before you crack a lock pick, you must pay attention to the fact that there is no strong pressure on the rotator. Otherwise, the front pins will stop moving. After the back pair is groped, you need to very carefully pry the pin, and then release it, but leave the master key itself on the last. After that, you can enter the rotator. But do not forget that there is room for a master key.
Now you can make movements clockwise, but they should be quite smooth. Next, carefully pry the rear pin. If everything is done correctly, you can hear a characteristic click. A pair of pins will not be as elastic as before. But do not make much effort. If you continue to move further with the master key, then engagement may occur, because the separation line will be drawn. You just need to rotate the rotator evenly, without pressing on it.
A few important points
The fourth pair of pins will be next, so finding it is pretty simple. Before breaking such a lock, you just need to lift the pin until it begins to give in. In this case, the force on the rotator must be applied. After he begins to enter the separation line, you can feel it, as well as hear certain clicks. With the third element, everything is similar. The main thing is to perform uniform translational movements. For analogy, you can lead the process of twisting the lid on a jar of mayonnaise. Here, clicks can not only be heard, but also felt.
What determines the success of the operation
After the last pair of pins yields, the cylinder will begin to rotate absolutely freely, and the door will open. But some just don’t know how to break the lock, and they run into some problems. That pin is very high, then the rotator does not lend itself. You just don’t need to put too much pressure on it, the pin will then lower on its own, and the cylinder will open. A large number of hacks are made quite successfully in this way. If all the methods have been tried and the door is still closed, you need to start all over again. Perhaps a mistake was made somewhere.
Invisible castle
Of course, the well is considered the most vulnerable spot. And many professionals are convinced that having certain skills and knowledge, it is easy to understand how to break the lock with a paper clip, master key or other tool. All this works if there is a core itself. But some castles have certain nuances. They simply do not have a keyhole. Such products are unique. They are also called invisible, because they do not have that vulnerability that is hacked.
In order to open such a door, you do not even need a key. It is enough to have a proxy card or a special key fob. Such locks are characterized by a high level of security, and many experts recommend installing them. In this situation, the offender will be at an impasse. It can have a variety of hacking tools, but only a keyhole can tell where you need to make an effort to cut strong steel pins. That is why he received the name "invisibility". There are crossbars in it, the mechanism itself is mounted on the door, and it’s hard to imagine how to break the lock. You can’t look anywhere, nothing is visible anywhere. And not only outside, but also inside. That is why traditional methods of removing obstacles do not work here at all. Need to look for an alternative. And hardly anyone wants to completely tear down a door or punch a hole in a wall. Yes, and this is not a way out of this situation ... But if there is such a device, then, most likely, a mechanism for breaking it will arise soon enough.
And finally ...
In this article, we have described in detail how to crack a padlock, mortise, patch, and pin. In fact, you need special equipment and certain knowledge. There are some subtleties that you need to know for each particular type, but the fact that it is quite simple to open any product is quite obvious. No level of secrecy will become an obstacle for professionals. Many owners of steel doors are absolutely sure that they have nothing to fear, because their locks are tightly cut into the canvas. In fact, for such an operation, only a quarter of an hour is enough - and the barrier will be removed. A keyhole gives out any model. She cannot hide any secret. Hope remains on the “invisible” locks, but this is only for now ...