Needless to say, that very often laptop owners have to roll back the parameters to the factory state as one of the most extreme measures to restore the device’s performance? Most often, the laptop manufacturer supplies it with a pre-installed operating system and special proprietary utilities that allow you to perform all the necessary rollback actions. The following steps are for you to figure out how to reset your Acer laptop to factory settings.
By and large, it does not matter at all which laptop model you have, since in most cases all the operations performed will be completely identical. Two main methods can be proposed. As the first situation, the rollback of parameters for models with preinstalled Windows OS will be considered, as the second situation, we will take the cases when the operating system could be reinstalled or upgraded (for example, when switching from the seventh and eighth modifications to Windows tenth or when replacing the hard drive )
How to reset Acer laptop to factory settings using proprietary utility?
As the first and easiest way to roll back a laptop, if the operating system installed on it is at least somehow loading (even in safe mode), we can suggest using a special environment built into the software shell of the device by the manufacturer itself, called Acer eRecovery Management.
Since at the stage of the factory installation, the shortcut for the application’s shortcut is created in the start menu of the operating system itself, the problem of how to reset the Acer laptop to the factory settings is easily solved.
Just find this applet among the installed programs in the Start menu, and after starting it, use the recovery section on the left side of the main window, and then select your preferred rollback option (either with or without saving data), then just click the buttons confirmation of operations. However, in this case, it is worth considering that if there are viruses in the system, the choice of recovery while preserving user files and programs is inappropriate, since the malware may not be deleted, and after the rollback will continue its destructive activity.
How to reset if laptop fails to boot: BIOS actions
But very often you can meet situations where the operating system does not start at all under any pretext. In this case, you can use some BIOS settings. Speaking about how to reset the Acer laptop to factory settings via BIOS, you should not understand this literally. In the primary system itself, you can only activate a special option that is responsible for rollback (no more).
When you turn on the laptop, press the Del key, and after entering the BIOS in the main section (Main), find the D2D Recovery item (it activates the use of the recovery environment even without the obligatory start of the OS). If it is set to Disabled, switch to Enabled, and then exit the interface with saving the set parameters (F10 + Y).
Recovery after setting BIOS parameters
Now you are close to getting answers to questions about how to reset your Acer laptop to factory settings. The keyboard shortcut that allows you to run the above environment for all models invariably is Alt + F10.
After that, the same utility will be launched, which was described above, but only, if I may say so, in a DOS-like mode, but with a graphical interface. You will only have to choose a recovery method and wait for the completion of all operations.
Note: if the reset is performed for the first time, it is quite possible that a password will be requested. To access the functionality you need to enter a standard code consisting of six zeros.
How to reset in Windows 10: standard layout
It can be assumed that you upgraded the system to Windows 10 or installed it when replacing the hard drive. In these cases, naturally, there will be no recovery environment on the disk.
For rollback in the "top ten" you can use the special reset mode, which can be activated through the appropriate section in the options menu.
Reset at start from removable media
Resetting the Acer laptop settings in Windows of the tenth modification can also be performed by rebooting while holding the Shift key (this is equivalent to launching special start options), and then through the recovery section and several additional menus get to the reset point.
Similar operations can be performed when starting from a flash drive with the “dozens” installation distribution kit, after choosing the main language and regional parameters, use the recovery link located in the lower left corner, and then perform standard menu navigation to the desired item.
Reset with saving data: additional method
Finally, briefly dwell on how to reset the Acer laptop to factory settings with saving files and programs in a working "top ten". You can do it, no matter what they say! To do this, you first need to create a bootable USB flash drive using either an image file and programs like Rufus, or a Microsoft application called Media Creation Tool.
After connecting the media to the USB port, expand its contents and simply run the Setup.exe installer file. At one of the stages it will be offered to choose a recovery method, in which just you can specify the preservation of all user data and installed applications.
Note: when the reboot starts, the USB flash drive must be removed from the port so that it does not accidentally start, since such drives are usually placed first in the boot device queue in the BIOS automatically.