The best water-repellent impregnation for shoes - reviews, features and manufacturers

All shoes deteriorate from frost, moisture, snow. Due to these factors, it quickly loses its original appearance. But it can be saved if it is properly looked after. This requires water-repellent impregnation for shoes. Reviews indicate that this tool really extends the life of the products. You just need to use it correctly.

Act

Water-repellent impregnation is considered an emulsion or solution. It is treated with boots or boots. The action is as follows:

1. According to reviews, water-repellent impregnation for shoes should be used immediately after acquiring a pair, while on the surface of the thing there are no dirt and scuffs. The product is copiously applied to shoes; solvent evaporation occurs in a few minutes. A thin water-repellent layer appears on the surface. Its molecules do not disappear anywhere, but reliably protect the surface of the shoe from moisture.
2. The protective agent will be not only on the surface, but also inside the fibers. They will have minimal hygroscopicity. The surface repels moisture, so it does not accumulate in the form of drops.

Benefits

What is the best water-repellent impregnation for shoes? Reviews indicate that there are several such funds. The benefits of using them are as follows:

1. The material becomes resistant to water and aggressive substances - salt, reagents, pollution.
2. Almost does not violate its breathability.
3. There is no danger to human skin.
4. After processing, the material becomes elastic, it dries less and retains an attractive appearance for a long time.
5. With impregnation the fabric does not become heavier.
6. The material is protected from fast fading.

Of the shortcomings, we can only highlight the need for wasting time on processing. But the effect is worth it.

Views

Many manufacturers produce water repellents. Each of them has its own properties. There are water-repellent impregnations for shoes. Reviews of them confirm an excellent result. Funds are released in different types:

1. Creams. They are divided into 2 types: thick and liquid. The former are perfect for leather shoes. They are also handled by bags and gloves. The composition contains a solvent, wax, animal fat, dyes. Liquid creams are suitable for warm weather. They have few solvents, and often water is present instead. Such products protect little shoes, but make them shiny.
2. Spray. The tool is considered universal. It is used for various materials, including clothing. The spray is easy to apply and it does not require special brushes or accessories. It is sprayed on shoes, bags, clothes. Just do not perform the procedure indoors. Spray has a longer shelf life compared to cream.
3. Water-repellent impregnation for shoes. Customer reviews indicate that such products differ from creams and sprays. They penetrate deep into the material. This provides long-term protection against external influences. To choose the best water-repellent impregnation for shoes, reviews are advised to choose it for each specific product. So, for nubuck, a material with villi, a fluorocarbon resin agent is required. If the shoes are suede, then silicone impregnation is suitable. For other materials, compositions of water repellents will be required.

For leather and suede

Do not confuse such water-repellent products that are used only for shoes. The consequences may be different. When answering the question of which impregnation is better, you should consider:

1. Aerosol is suitable for smooth skin, but it does not fit suede. It is processed using universal tools consisting of fluorocarbon resins. Wax and fat are able to glue the villi and spoil the products of suede and nubuck.
2. Leather products are the other way around. It is important that the product has more wax and fat. It is desirable that the composition includes mink oil, seals or goose fat, since they have a high penetrating ability.

Silicone impregnations have long been considered the best. Since water after treatment flows off the surface, it is therefore not absorbed. Using a protective silicone film, the surface is softly enveloped, but the air exchange will not be worse. Effective effect occurs after 8-9 hours, so processing is performed in the evenings. The procedure has its own subtleties:

1. Fluorocarbon resins are being replaced by silicone by many manufacturers. Then the effect of the impregnation will be completely different. An invisible film appears on the surface, which, on the one hand, repels water, and on the other, prevents shoes from “breathing”.
2. Fluorocarbon resin acts differently: its components are distributed between the fibers. If moisture gets on the product, it will be in the form of drops that are easily removed.

Before you purchase a tool, you need to familiarize yourself with the composition. Honest manufacturers always indicate the exact name of the components. According to customer reviews, you should choose only proven means.

Other materials

1. It is useless to protect fabric shoes from moisture. It is advisable not to wear it in the rain.
2. It is also useless to extend the life of leatherette shoes. There are no special products for this material, as it is not capable of absorbing any substances. The workshop will allow to improve these shoes.
3. Membrane shoes need no less attention. For her, ordinary impregnations are used, which are used in the care of natural skin.

What to choose from?

Which water-repellent shoe polish is better? Reviews confirm that the following are the most reliable:

1. Woly Sport. This impregnation is presented in the form of an aerosol. It is based on nanotechnology. Its price is about 400 rubles. The scope is any fabric, but most of all this aerosol is suitable for sports shoes.
2. Olvist. This water repellent costs about 250 rubles. It is considered universal, as it is used in the processing of textiles, smooth and fleecy skin.
3. Water-repellent impregnation for shoes "Salton". According to reviews, it is one of the best in terms of effect. The surface of the product does not deteriorate from moisture.
4. Textile Protech Impregnation differs from the others in that it is released not in an aerosol can, but in a bottle with a spray. Almost everyone processes it - from shoes to covers and tents. It costs about 1700 rubles.
5. Nikwax The price of this aerosol is about 250 rubles. The manufacturer produces this tool for different materials.
6. Water-repellent impregnation for Futon shoes. According to reviews, it reliably protects the product from moisture. It is enough to apply it according to the instructions so that the material always looks neat.

These funds are considered the most effective. Their principle of operation is approximately the same. Regular treatments will save shoes for many years.