During repair or repair of a small breakdown, superglue becomes an indispensable assistant. But one wrong move, and in front of you is a firmly glued surface that obviously did not need to be repaired. Do not rush to despair and say goodbye to a seemingly forever spoiled thing. We will talk about how to dissolve super-glue right now.
What is superglue?
The complex chemical composition, the main one of which is cyanoacrylates with the addition of plasticizers, stabilizers, activators and moderators, is the very superglue we used to see.
All of these substances act quite simply. When combined with water, which is present in the atmosphere, they harden and thereby fasten the necessary surfaces. I must say that a couple of drops of this substance is able to withstand temperatures of more than one hundred degrees and weight of more than two hundred kilograms per square centimeter. Therefore, if you accidentally
spilled super-glue, than to dissolve the consequences of its action - the first question for you.
Glue varieties
Usually we don’t think about which glue we buy, and in vain. The solution to the problem depends on its quality and capabilities. There are 2 types of glue, it is one-component and two-component. Actually, from the description it becomes clear that the composition of a single-component adhesive is very primitive. Its purpose is to instantly and reliably glue the necessary surfaces. The composition of the two-component adhesive includes active substances, which also allow the transfer of heat or energy. This means that removing it by heating will be pointless.
6 safety rules when working with glue
If super-glue were carefully applied, than dissolving its unwanted traces, people would not care. But since not everyone knows about safety when working with toxic substances, consider some rules that will help to avoid undesirable consequences.
1. Use work clothing capable of protecting maximum skin area from contact with the adhesive.
2. Glue, or rather, the substances that make up its composition, are very toxic. Perform any work in a ventilated room with good ventilation.
3. Do not use too much glue. The speed of action will not increase from an excess of sticky substance, but objects in contact with a surface that needs to be repaired, or fingers will feel all its power on themselves.
4. Probably, more than once it happened that the tube is full, but the glue does not come out. Do not use all your strength in the hope of knocking out the glue plug. Just grab a needle or a fine toothpick and clean the clogged nose. It will be much faster and more effective, and the risks of glue shooting in the eye or wall will be significantly reduced.
5. Never point the tube at yourself. One awkward movement, and the glue may be on the clothes, hands or get directly into the eye. Keep the tube away from us, and the nose point down. In this position, the glue follows better, and nothing harms health.
6. If the main part of the glue has already been used, and the tube takes up a lot of space, do not rush to fold or fold it. Cracks and marks may form at the bend points, through which glue will leak out. It’s better to donate a couple of centimeters in a cupboard or in the refrigerator than to clean clothes or hands.
General principles for removing superglue
Super-glue accidentally leaked. How to dissolve it? Do not know? Try nail polish remover. Moisten a cotton swab with liquid, blot the glued place several times, and after a couple of minutes you will see how the glue begins to split.
Any solvent such as white spirit or a small amount of gasoline will do.
A way out of this situation can be found in the pharmacy. It is enough to purchase a drug such as dimexide, it will help reduce glue residue from any surface. However, be sure to protect your hands from getting this product on your skin, as it can cause irritation.
Also remember that success in this difficult matter depends on how quickly you decide to remove superglue.
The most popular ways to remove superglue
It is no secret that each type of surface requires a special approach in the process of removing glue.
For example, according to the reviews of people who have encountered this problem, dried glue is best removed from the fabric with a solvent, which includes nitromethane, or with a special tool called Super Moment Antikley.
Another option would be to cool the fabric. Place the spoiled item for a few minutes in the freezer, and then walk through the stained area with a soft-brushed brush. Frozen glue should fall in small flakes. However, this option is not suitable for artificial synthetic fabrics.
You can, on the contrary, heat the fabric. Attach an unnecessary rag to the stain, and then smooth it properly. The glue should be on the top flap of the fabric, but the previously spoiled thing can be safely sent to the wash and then reused.
How to dissolve super glue from hands?
To remove glue from the skin, it will take a lot of effort. There are two possible options. The first is to wipe your hands with acetone, and then rinse thoroughly with soap and water. The second way is to steam out the skin of the hands, and then walk along the glued area with a pumice stone. I must say that in both cases the skin will be damaged, so after the procedures you need to lubricate your hands with cream or soothing lotion.
Soda or salt?
Another way to get rid of glue on the skin is ordinary table salt. Wet your hands, take a handful of salt and begin to rub it intensively. Soon you will see how the glue lags behind the skin, joining the salt particles.
In no case do not confuse salt and soda. With the same manipulations with soda, you will get the opposite effect. Hands stick together even more, and the cleaning process will stretch significantly.
Superglue and plastic
How to dissolve super-glue with plastic? The question is no less interesting, since plastic will not tolerate too hot or cold temperatures, and solvents based on gasoline or acetone can ruin the color or structure of the material. There are only two options left. Either go to the pharmacy for dimethyl sulfoxide, or carefully cut off the stained spot with a knife.
If the stain is still fresh and did not have time to freeze, then an ordinary rag will help. Intensively rub the place where the glue has got, and then wash it with any dishwashing detergent.
What to do if glue gets into hard-to-reach places?
For example, how to dissolve super-glue in a lock? A vinegar essence will cope with this task . The higher its concentration, the more effective the action. Pick up a vinegar syringe and fill it into the lock cylinder.
After a while, clean the hole with a toothpick or needle. If this method has proven to be ineffective, then use any solvent or anti-adhesive.
How to dissolve super-glue from metal?
Removing superglue from metal is not as easy as it seems. This is evidenced by the reviews of the victims. You can try to clean it with a metal brush or use the same acetone or solvent. However, as practice shows, solvents contain volatile substances that do not have time to grapple with glue and metal. Therefore, the only way out is to apply the solvent to a cotton pad or cotton cloth, lean it against the place that needs to be cleaned and seal it with tape or tape. This creates an airtight environment in which the glue begins to heat and melt on its own. It remains only to remove the adhesive tape or film and peel off the remaining glue.
Conclusion
When deciding to fix damaged things by gluing parts, read what super-glue consists of, how to dissolve it, and what not. Heat conducting glue is unlikely to give up under the high temperature of the iron. Remember safety precautions: do not bring the tube with glue close to your face, but when you notice it getting on your skin, try to clean the surface as quickly as possible without waiting for the glue to dry completely.