Gas lighters - the tool is very convenient and popular. They are used by just a huge number of people. But one day the moment comes when the fuel inside the housing runs out. At the same time, many people have a question about how to refuel a lighter with gas. This is a simple matter. However, everything must be done carefully and carefully. So, we will consider this process in stages.
How to properly fill the lighter with gas is an important issue. But it is equally important to know which fuel to use. In order for the tool to work smoothly, and its components are not clogged, refueling should be carried out only with triple-purified butane gas. Before this, it is absolutely necessary to free the lighter from the air remaining in it. Of course, the gas itself must also be fully utilized. The air that always remains in the housing after the fuel runs out is disposed of as follows. The gas regulator is set to "minimum". The combustion level valve for most lighters is located in the base area and it will not be difficult to find it.
The answer to the question of how to refuel a lighter with gas is not at all complicated. You only need to show a little sleight of hand. In order to release air, then you just need to take a needle, a thin pin or any other similar sharp tool and push the suction valve. After that, all the excess will come out of the lighter. Then, to fully guarantee the result, you need to click the lighter. Of course, you will not see fire at the same time, however, if air or the remains of butane are still in the case, they will come out completely.
Now we will consider actually how to refuel a lighter with gas, using a can. To do this, it is tightly clamped in the hand and turned over. Then, into the valve located below, insert the tip of the gas container and press firmly. Keep the can in this way for 5-10 seconds. Then it is sharply pulled away from the lighter. Be sure to hold the can only with the nipple down. In the event that everything is done correctly, you will not feel a characteristic chill, since the gas will not come out, but will go straight into the lighter body.
During refueling a characteristic hissing sound will be heard. Some spray cans are equipped with special dispensers. In this case, you will have to refuel in several stages. Filling the casing with gas refers to adiabatic processes, which are always accompanied by a certain decrease in temperature. Therefore, before you start using the lighter, you should wait a bit until it warms up. It will not take much time - no more than five minutes.
Sometimes the owners of expensive imported lighters, without risking carrying out such an event on their own, are interested in where to refuel the lighter with gas for money. Usually specialized workshops are engaged in this. Residents of small towns, most likely, still have to pick up a spray can and refuel the lighter yourself. It will be easy to find a suitable workshop for those living in megacities. For example, Muscovites who own Dupont lighters have the opportunity to take them to the top floor of the Central Department Store, to the official representative office of Dupont.
Thus, now you understand how to refuel the lighter with gas. With skillful hands, this will not be difficult.