The problem of the appearance of soot on the lower part of the iron began to take on a wider scale. This is mainly due to the negligence of the owners: they chose the wrong mode for ironing, messed with something, used it incorrectly. And now the iron is dirty and needs to be cleaned. How to clean the iron from the stick? This article will discuss this problem and ways to get rid of it.
The easiest way to solve this problem is to purchase a new one. However, for someone, this option, on the contrary, is the most difficult. Not every family has the opportunity to change their irons every month if someone inadvertently handles them. Cleaning the sole of the iron might not be necessary at all if the operating rules were observed: temperature control, the use of soft water, etc. If you follow the rules recommended by the manufacturer of household appliances, you can avoid a lot of problems in the future. If hard water is used, there is a high probability of scale formation, and a plaque will appear on the sole of the iron. Such a coating will ruin your ironing. Sometimes the fabric may even burn. Therefore, in the future you should be careful after you manage to get rid of pollution.
How to clean the iron from the stick?
We live in an age of progressive technology that does not stand still. Therefore you
can safely count on new inventions. In this case, a universal tool for cleaning the iron will help you - a special pencil, developed according to modern technologies, for removing carbon deposits. At the same time, using such a tool is not difficult. No special precautions need to be taken and no qualified assistance is needed for this procedure. It is only necessary to heat the iron and pencil, and then rub the bottom, on which the burn. Starting to act, chemical processes will emit unpleasant odors - the scale will melt, which means that things are moving in the right direction. After this procedure, the bottom of the iron should be wiped with a rag, and hands should be washed well with soap and water., ? , . . . , , . – , . , . , .
A mixture of liquid detergent and soda can also help. To obtain the necessary cleaning mixture, you need to combine the indicated ingredients, and then mix them until a homogeneous mass is obtained. The resulting slurry should be rubbed into the damaged surface of the iron. After 30 minutes, it is necessary to wash off the mixture from it and wipe it with a rag. With this cleaning method, the iron does not need to be heated.In principle, even vinegar can come in handy as a carbon cleaner. Wash the iron with vinegar as you wash the dishes with water. At the same time, note that vinegar is quickly eroded, so periodic impregnation is required. Now you have learned how to clean the iron from the burn at home.