The operation of the pool is associated with a wide range of tasks aimed at maintaining its technical and optimal biological state. They must be solved by special means, equipment and devices designed for specific purposes. But pool accessories are not limited to these additions. Manufacturers of hydrological structures themselves produce separate groups of fittings, which increase the efficiency of the basin in various aspects.
Plumbing fixtures
Not a single basin can do without a hydrological communication infrastructure that directly provides the possibility of its operation. These can be communication channels with the central water supply system, local intake stations on the site, ponds, etc. The basis for the connection is hoses, thanks to which additional equipment is also introduced into the system - water heaters, chlorine generators, and filtering devices. It is recommended to use products based on polyvinyl chloride (PVC), as they are characterized by practicality, wear resistance and ease of use. For direct connection of various functional components together with hoses, it is necessary to purchase mounting accessories for the pool in the form of adapters, fittings, valves, etc. The simplest filtration systems that delay organic pollution, fine debris and dust are often used in these nodes. Cleaning devices are selected based on the requirements for absorbent material, its useful and healing properties.
Pool pumps
After all the necessary connections of the structure with supply channels and additional equipment have been made, it should be possible to circulate water. This requires a pump that will provide pool filling, filtration tasks and pumping water. A separate group is air devices designed to inflate rubber products. Of course, the specific set of functions, as well as the nature of their execution will depend on the type of equipment and model. The simplest pump for the pool is a handheld small-sized unit, which is inexpensive and does without connecting to the network. But he will have to be served by his own physical strength, which should be borne in mind. More productive foot models of pumps. They can be used both for pumping and for pumping air. Serve full-size pools appropriate electrical equipment. Pumps with electric motors can fill a large pump with air in a few minutes, and with it rubber products for swimming.
Staircase constructions
For convenient ascent to a custom pool area, it is advisable to use special stairs. Usually they are applied to constructions, the height of the sides of which is more than 100 cm. As a rule, these are prefabricated multifunctional devices that perform tasks of the descent platform and the fence for children. With regard to performance, it is advisable to choose a ladder for swimming pools made of stainless steel, since it is unlikely to eliminate the risk of contact of surfaces with water. At the same time, the platform itself and the steps should have stable lining made of plastic with anti-slip notches. Already during the installation process, it is important to calculate that the legs of the stairs rest on a stable, even base and allow the possibility of hard fastening.
Accessories for frame pools
The main difference in the maintenance of structures of this type is the need for winter conservation. This applies to stationary frame models, which are not removed after use, but remain in their place constantly. The user's task is to minimize or prevent negative environmental impacts on the pool. First of all, to do this, you need to drain the water, clean the bottom and sides with special chemicals, as well as dismantle the structural additions - for example, the same staircase. The most important conservation tool will be an awning for the frame pool, which will protect the surface of the structure from dirt, leaves, small debris, and in some cases also perform thermal insulation. For more reliable protection against mechanical damage, it is recommended to purchase covers made of high-strength plastic. They fit comfortably onto the structure and are also easy to remove.
Care Kits
Special care for the external and internal surfaces of the pool is required not only during storage. Maintaining a healthy biological state of materials and the aquatic environment is ensured by special devices. A typical kit includes brushes for cleaning the walls and bottom of the pool, a net for surface cleaning of water, as well as filtering membranes and pumps. Ozonizers perform water disinfection tasks. These are special accessories for pools that cannot be treated with traditional cleaning chemicals like disinfectants and bacteriological agents. The action of the ozonizer can be represented as the process of generating nanobubbles using silica gel. There are complex preparations for water treatment, which disinfect without chlorine, stabilize the stiffness of the aquatic environment, provide a coagulation effect and prevent the growth of algae.
Conclusion
The choice of certain auxiliary tools for the operation of the pool will depend on many factors. Even at the stage of purchasing a suitable design, optimal approaches to servicing and caring for it should be calculated. In particular, accessories for a stationary pool type are characterized by a more serious technical implementation. These are durable PVC hoses, productive pumps, powerful filtration units and special mounting devices. As for small-sized inflatable pools, their use mainly involves air pumps, means for the care and storage of materials.