The modern market offers a huge selection of irons. But, despite the non-stick coating and self-cleaning system, almost every housewife occasionally encounters the problem of soiling of the sole. Therefore, the question of how to clean the sole of the iron is more than relevant. There are many cleaning methods, both using professional cleaning fluids and using improvised means.
How to choose the right iron
Of course, if you choose the right model for the iron, then problems with stains, dirt and breakdowns can be minimized. Today, there are three main varieties:
- Irons with aluminum soles - such models are not very popular. Of course, such irons quickly cool down and heat up, but the surface of the soles quickly scratches.
- Chromed or stainless steel irons - the soleplate is sturdy, glides on easily and can be cleaned. On the other hand, this technique is heavy, it slowly heats up and just as slowly freezes.
- The most popular today are irons, the sole of which is made of cermet.
When choosing an iron, you should also pay attention to the control system, cord length, heating temperature, the presence of non-stick coatings and a steam self-cleaning system.
How to clean the sole of the iron with professional tools
In almost every household chemistry store, special cleaning products can be purchased. Very popular are special pencils. In order to clean the sole, the iron must first be warmed up to the maximum temperature, then carefully rub with a pencil. Unfortunately, this technique has one drawback. Soles of irons, as a rule, have openings for steam, and the cleaning agent quite often clogs these openings.
How to clean the sole of the iron from polyethylene
If the decorative elements of clothes are improperly ironed, a plastic film often sticks to the sole of the iron. To clean the equipment from such pollution is quite simple. For this purpose, it is recommended to use either alcohol or acetone (nail polish remover is perfect). Dampen a cotton swab in a cleaner and wipe the surface of the sole thoroughly. If particles of polyethylene clogged in the holes, use a cotton swab to clean.
How to clean the sole of the iron from stains and burns
Due to improper use of household appliances, soles often remain on the sole, which can leave marks on the fabrics while ironing. There are many ways to get rid of brownish pollution. Quite often, hydrogen peroxide is used for this purpose. Another effective cleanser is ordinary table vinegar.
The cleaning technique is very simple. First you need to warm up the iron, and then disconnect it from the power supply. Dampen a cotton swab in the product of your choice (bite or hydrogen peroxide) and gently wipe the sole of the device. Process the holes with a cotton swab. After cleaning, wipe the sole with a damp cloth and then dry, preferably from a cotton cloth.
How to clean your iron from scale and rust
Scale and rust in the iron, as a rule, appear when tap water is used for ironing. Remember that only boiled or distilled water can be poured into the iron. You can clean the device with citric acid. Dissolve a small amount of acid in water and fill the solution into the iron tank. Leave on for 20 minutes, then warm up the appliance. Use the steam button to thoroughly clean the holes on the sole.
In any case, remember that household appliances need regular care. Wipe the sole of the iron with a damp cotton cloth after each use, pour only purified water into it - and the equipment will serve you as long as possible.