Do-it-yourself slider for cleaning your keyboard - a quick and cheap way to clean

Surely everyone was faced with a situation where you need to remove dirt from hard-to-reach places. It is not possible to get a rag into narrow crevices, and there is more and more dirt. In such a situation, a slime for cleaning the keyboard perfectly helps. Due to its stickiness and plasticity, it reaches even the narrowest places, collecting dust, dirt, and particles of pet hair.

What is a slime

The gel for cleaning the keyboard is a sticky substance that can attract small particles of garbage, crumbs, threads and other unpleasant inclusions. The slime is very soft and plastic, easily stretches over the surface and gathers back. In this case, the substance does not stick to the fingers and does not leave unpleasant traces on the surfaces.

Why can you use Velcro

Due to the soft and plastic texture, lizuns for cleaning the keyboard are often used for other purposes. With it, you can clean the leaves of large indoor plants, grilles and air conditioners. Some hostesses even use it to wash plastic windows. The soft and sticky mass allows you to penetrate where you simply can’t get with a normal rag. With the help of a slider, you can clean the grooves and locks, the space around the fittings, the gaps between the frame and the windowsill.

Using a slime, you can clean the seams of bags and wallets, where a lot of small debris is usually clogged. Some housewives use this substance to clean openwork jewelry, carved decorative elements. The lizun will also be irreplaceable when cleaning in a car. Its main advantage is that the substance can be used where contact with water is excluded.

And of course, lizun is an excellent tool for cleaning the keyboard. It does not just help to get small debris out of the cracks. One of the substances that make up its composition has antibacterial properties. This is very important, especially for computers located in offices. The keyboards of such devices accumulate many germs. And Velcro will help to slightly reduce their number.

Let's find out how to make a slime for cleaning the keyboard.

Cooking process

To make a slime, you will not need any expensive components. Such components will be sufficient:

• glue (ordinary PVA is quite suitable) - 250 ml;
• a dye of a suitable shade;
• sodium tetraborate (borax glycerin solution) - 1 bottle;
• gloves
• mixing container;
• the spoon.

Do-it-yourself licking a keyboard for cleaning the keyboard is very simple. Even a child can cope with the task:

1. Put on gloves, shake glue and pour into a container.
2. Add a few drops of the dye of the desired color. Mascara, watercolor, food color, gouache, brilliant green, ink, or something like this will do. Mix everything carefully so that the adhesive is evenly colored.
3. Continuously stirring, gradually add borax to the mixture. This substance is responsible for the viscosity of the mass.
4. When the mixture becomes so dense that it sticks to the spoon, the mass must be removed from the container and begin to knead with your hands.

As a result, a soft and fairly plastic mass will come out that can hold its shape for a while. However, be careful, if you overdo it with a borax, the mass will become very dense, almost rubber, and will be unsuitable for cleaning.

Depending on the amount of paint you use, you will get a slime of a gentle or intense shade. If desired, you can not use paint at all, then the cleaning mass will turn out white. You can get a transparent composition, for this it is better to take silicate glue.

How to use and store

In order for the lizun to retain its properties for a long time, it must be stored in a tightly closed bag. This will prevent moisture from evaporating and the cleaning gel will not dry. So that the Velcro does not spread and retains its properties longer, it is best to store it in the refrigerator.

Using the substance is very simple:

1. Remove the Velcro from the bag and place on the keyboard or other surface that needs to be cleaned.
2. Wait a little while the slime “spreads” over the surface. If you wish, you can help him a little with your fingers.
3. Slowly, starting from the edges, unclip the cleaning mass from the keyboard and rinse under running water.
4. Dry the lizun from the residual moisture and put it back in the bag.

You can use this mass repeatedly. It will work effectively until it loses its sticky qualities.