How to configure DIR-300: step-by-step instructions, tips and tricks

Without the Internet, nowhere. But in order to ensure a stable connection, you need to select the correct router and configure it. It is with the latter that users experience various problems. As a rule, providers themselves configure routers and routers. But what if a failure occurs and the settings are reset? Only configure yourself. And this is not so simple.

From the article you will learn how to configure the D-Link DIR-300. This is the most popular router, which is widely used by domestic providers. Therefore, we take it as an example.

Router Description

First, let's talk about the characteristics of the D-Link DIR-300. How to configure it, we learn a little later. So, this router is available in several versions. Versions B1, B2, and B3 are no longer manufactured or sold. Finding them is almost impossible. Therefore, we will not specifically consider them. Modifications B5 and B6 are currently the most common. They are able to provide gigabit Internet (of course, only when connected via cable). Wireless data transmission can be carried out on two channels. There is even the ability to broadcast in the notorious 5 GHz channel, which increases the speed of data transfer via Wi-Fi. But this requires that devices connected to the router also support this standard.

The appearance of the router DIR-300

The appearance of the router is the most common. On the front panel is a set of indicators. On the back are the necessary RJ-45 type ports, a power button and an antenna to enhance wireless connectivity. At the bottom of the device there is also a special hidden button to reset the settings to standard. You can’t just press it. Have to look for something subtle and sharp. These are the characteristics of the D-Link DIR-300. How to configure it is the question. And we will deal with this issue now. But first you need to connect the router correctly. Most of the problems arise precisely due to an incorrect connection.

Router Connection

The question of connecting a router seems to be simple, but some users manage to get confused in several ports. Therefore, before setting up the D-Link DIR-300, you need to connect it correctly. So, you need to do the following. In any of the first four ports from the antenna, you need to insert a network cable, which you should plug into the computer’s network card with the other end. In a separate slot called Internet you need to insert the cable provider. It is through it that data will be transmitted to the router. And in the round socket you need to insert the plug of the power supply and then plug it into a power outlet. That's all. It remains only to turn on the router using the appropriate button.

Can I connect to the Internet right away?

It is worth noting that during the configuration of the router and immediately after it, in no case should you try to connect to the Internet. If there is any connection icon on your desktop, forget about it. Only after full configuration and the first reboot of the router can you do this. Now, let's move on to the answers to the question of how to configure WiFi on a DIR-300 router. It should be noted that all actions must be carried out in strict accordance with the instructions. And in exactly the same order. Otherwise, you can configure the router so that there will be no internet at all.

Entering router settings

Before setting up a DIR-300 router from Beeline or another provider, you need to enter the router settings. In principle, it is simple. But beginners will not be able to cope with this task. The fact is that to enter the settings you need to use a computer browser. The action algorithm is very simple. Here's what you need to do:

1. Open a web browser and enter "192.168.0.1" in the address bar. Then press the Enter button.
2. A window will appear for entering the login and password of the administrator. The default is "admin / admin". If the username and password are not suitable, then reset the settings to standard using the Reset button on the case and try to connect again.
3. After entering the login and password, press the Enter button.

That's all. Now you are in the router settings menu. It is worth noting that the process of entering this menu on other routers is exactly the same. There are no differences. Now let's move on to the issue of how to configure the D-Link DIR-300 router from Beeline or another operator. And we will start by checking the settings on the computer.

Check LAN settings on PC

In order for the router to be configured successfully, you must initially check the network settings on the computer. If the parameters are incorrect, then a stable connection will not work. And even going into the settings of the router will be problematic. So let's start checking the connection on the PC. To do this, do this:

1. Launch the "Control Panel" and click on the item "Network and Sharing Center."
2. Then we look for the "Local Area Connection" icon, right-click on it and click "Properties" in the menu that appears.
3. In the window that appears, select "Internet Protocol version 4" and click on the "Properties" button.
4. Now we check that all the checkmarks are where they should be. That is, the IP address and DNS server should be determined automatically.
5. If everything is so, then just close all the windows.

Now you can move on to the question of how to configure the D-Link DIR-300 with Wi-Fi on board. Better to start with WAN setup. For without this, it will be impossible to set up wireless data transmission. Now we will consider the process of applying the parameters we need in the setup menu of the router itself.

WAN WAN Setup

So, let's move on to the parameters of the D-Link DIR-300. To configure for Beeline or any other operator this router is not difficult. The process itself will be exactly the same. The differences will only be in the input data for the connection. And then only in some. The instructions for implementing this process are as follows:

1. We launch the browser and enter the settings of the router according to the already known scenario.
2. Next, click on the "Advanced Settings" button.
3. After that, go to the "Network" tab.
4. Now you need to create a connection. Click "Add."
5. Next, indicate the type of connection of a particular provider (usually PPPoE), enter the login and password to access the network. Then click on the "OK" button.
6. You will be redirected to the connection list page. Here you need to click on the button "Save Changes".
7. Next, you just need to refresh the page. After that, the connection will work.

Apparently, there is nothing complicated in this process. You can even configure the DIR-300 as a repeater. But this must be done during the installation phase of the wireless network. We will deal with this issue in the next chapter. But in general, it must be taken into account that the input data must be double-checked several times. If they are entered incorrectly, you will have to redo everything. However, let's move on to the next step.

Setting up a Wi-Fi wireless connection

Now let's move on to the most interesting part of the D-Link DIR-300 setup process. How to set up a wireless connection? This is a very useful thing, which allows you to connect smartphones, tablets and laptops wirelessly to the router. The setup process itself is not particularly complicated. But you need to do everything in strict accordance with the instructions. And here she is:

1. We open the router settings using a browser and the corresponding address. Enter the username and password, press Enter.
2. Then click on the "Advanced Settings" button and move to the Wi-Fi tab.
3. Next, select "Basic Settings".
4. Now you need to enter the name of the new network in the line with the name SSID. Please note that only Latin letters and numbers can be used in the name.
5. We save the settings by clicking on the appropriate button and return to the previous page.
6. Go to the "Security Settings" tab.
7. Here in the line "Encryption Key PSK" enter the password to protect the Wi-Fi connection. It should consist only of Latin letters and numbers.
8. Click on the "Change" button and close the settings of the router.

That's all the work. Now you know how to configure WiFi on the DIR-300. There is nothing complicated about it. But beginners can get confused in the abundance of settings. Even though the menu is in Russian. Therefore, you need to do everything in strict accordance with the instructions. Only then will your efforts succeed.

General setup recommendations

So, we examined the D-Link DIR-300 router. How to configure it, you already know. But there are certain tuning recommendations that can help in cases where nothing works. You should not ignore them, since they are really relevant:

• If there is no connection to the router. It is recommended to try another cable. the fact is that there are two ways to crimp a twisted pair. One is designed to connect two computers to each other, and with the help of the second you can connect a router or router. You probably have the wrong type of cable. Or he’s broken somewhere.
• If you can’t get into the settings of the router. If the standard password and login are not suitable, then it is very likely that the provider changed them. However, there is a way to solve the problem. It is enough to reset the router to factory settings. This can be done using the Reset button, which is usually hidden from the user's eyes.
• If there is no connection after setup. Check again the data that has been entered. There is a good chance that a mistake was made somewhere. If this is true, then you will need to repeat the procedure for configuring the router.

The above recommendations may well help when setting up the router. After all, even a trifle can affect the final result. And to connect a computer to the Internet it is highly recommended to use a high-quality cable, and not anyhow. This will increase the speed and quality of the connection.

To summarize

So, what about the D-Link DIR-300 router (how to configure it is no longer a secret)? This is a completely modern router that is able to provide a high-speed and stable Internet connection using PPPoE technology. But only if properly configured. The router has a powerful Wi-Fi transmitter, can operate at 5 GHz and can be used as a repeater. It looks like it should be a modern device for connecting to the Internet.

Configuring the DIR-300 to work with the network of a particular provider is not so difficult. Just unprepared users can get confused in the intricacies of settings. Therefore, it is worth strictly following the instructions presented above. Only then can success be achieved. If your provider in the contract did not provide the necessary router settings, then you should call technical support and find out about them. Only then can the router be fully configured.

Conclusion

Well, now you know all the necessary information on how to configure both the D-Link DIR-300 and WiFi on it. One only has to warn that changing the other parameters of the router is not recommended. Otherwise, he completely refuses to work. And then you definitely have to call a specialist to fix the problem. But if everything is done in strict accordance with the instructions, then you can cope with the configuration of the router on your own. The main thing is not to be afraid and pre-check all the equipment and connecting cables. In any case, it will not hurt to practice configuring routers. After all, a failure can occur at any time. And the user needs to be prepared for this. You never know what can happen ...