Instructions on how to run a drive on a laptop

In the modern world of the Internet, where you can watch movies and listen to music online, as well as download any program you need from the Web, the need for disks gradually disappears. But at the same time, users from time to time the question arises, how to run a disk on a laptop. Before answering this question, it is worth noting that, in addition to DVD- and CD-ROM disks, there are bootable Windows disks and a laptop hard drive.

Run the disk on a laptop

So, before you run the disk on a laptop, you should find out if the drive reads this format. To do this, we look at the marked value on the drive: if the required format is not in the list, it means that it will not be read by the laptop equipment. To start a disk on a laptop, you must follow the instructions below:

1. Click on the Eject button of the drive to open it.
2. We fix the disk in the spindle for fixing. It is important to set the disk on the right side, otherwise it will not be read. If there is an image on the disk, then it cannot be set face down. In that case, if it is two-way, then write closer to the hole of the disc its side (immediately taking into account that the bottom side will be read).
3. We close the drive tray, while on some models you must first unwind the disk.
4. We wait until the disk is found by the laptop.
5. Done!

Now the user knows how to start a disk on a laptop. But in the event that the disk cannot be read and the user has done everything correctly, this may be a sign of a device malfunction or damage to the surface of the disk. To check one of the problems, we start another disk in the drive: if it is read, then the problem is in the disk, if not, then in the equipment, in this case you should contact the wizard.

How to run a Windows disk on a laptop?

To complete this action, you must perform the following steps:

1. Insert the boot disk into the drive.
2. We restart the device and go into the BIOS system. To do this, when loading the device, press the "Del" key (in case the user does not know which button is responsible for starting the BIOS on his device, it is necessary to look at the bottom of the screen when starting the equipment, as a rule, the desired key is indicated opposite the inscription "to enter setup ").
3. Next, the user enters the BIOS menu. To perform actions in this window, you must use the laptop keyboard.
4. Then select "Advanced BIOS Features".
5. In the window that appears, select the launch using the CD-ROM.
6. Then we save the settings by pressing the F10 key.
7. Then the laptop will restart, and a window will appear with the inscription "Press any key to boot from cd or dvd", press any key.
8. In the installation window that appears, click "continue" and carry out the Windows installation procedure.

How to run a hard drive on a laptop?

If the laptop has stopped seeing the hard drive, then most often it is all about the drivers. To update the driver, use the following instruction:

1. Open the device manager: to perform this action, in the search bar in the start menu, write "device manager".
2. In the window that appears, select disk devices.
3. Right-click on the equipment we need.
4. Select “update drivers”.
5. In the window that appears, click on the option in which the system itself finds the necessary driver and installs.

Finally

Practice shows that serious problems with starting up disks on a laptop cannot occur. This article not only answers the question of how to run a disk on a laptop, but also how to run Windows and a hard drive.