The most affordable printing systems include the Brother HL 1110r laser printer. Owner reviews focus on its very modest technical specifications. But at the same time, his price is corresponding. It is about this affordable peripheral device for printing documentation that will be discussed later.
Specialization
The most optimal Brother HL 1110r laser printer is used when creating entry-level printing systems. That is, the number of printed pages during the calendar month is relatively small, and mediocre requirements are put forward to their quality. In this case, the speed of such a device should be sufficiently high, and the cost of consumables minimized.
Therefore, most often this printer model is used at home. Another possible place of its operation is copy or duplication centers. But if in the first case such a printer is used solely for outputting documents, then in the second it must be supplemented with other, more functional peripheral devices, for example, MFPs. Also, such a printer can be successfully used in small offices. These are the main areas of use of this device.
Equipment
The delivery list for this printing system is as follows:
- Laser Printer Brother HL 1110r.
- A description of its capabilities is given in the instruction manual. Also in this part of the documentation is its technical specifications and setting procedure. In addition to this, general recommendations are given regarding the operation of such a document management system.
- Separately, a warranty card is also included in the delivery list. Its validity is limited to one year from the date of purchase of the peripheral device.
- There is also a CD with a set of drivers and documentation in the delivery list.
- Interface cord for switching the printing system with a personal computer.
- Power cable. With its use, power is supplied to this peripheral device.
- Starter toner cartridge. Its estimated resource is up to 500 pages in monochromatic design.
Main settings
A typical budget printing system is the Brother HL 1110r laser printer. His characteristics are as follows:
- The main format of the output pages is A4.
- The output of the first sheet takes no more than 10 seconds.
- The output speed is 20 pages per minute.
- The maximum resolution of output documents is 600 x 600.
- Type of printing - laser, monochromatic.
- The list of interfaces includes only USB. No other switching methods are provided.
- Maximum power consumption - no more than 380 watts.
- Recommended page density is 65 - 105 g / m 2 .
- The weight of this printing system is limited to 4.5 kg.
- Its dimensions are 340 mm x 238 mm x 189 mm.
A typical economy printing system by today's standards is the Brother HL 1110r laser printer. Reviews at the same time highlight its high level of reliability. As operating experience shows, such printers rarely break. Still, the eminent manufacturer monitors the quality of products.
Technology
The Brother HL 1110r laser printer boasts a high documentation output speed. Reviews at the same time indicate that it can display up to 20 sheets in a minute. Increased performance in this case is provided by the technology that underlies this device and is called “laser”.
Its essence boils down to the fact that a drum made of selenium is installed in the cartridge. On its surface, a negative of the output page is formed from the lines of the electromagnetic field strength. Then the powder is fed into the cartridge. Under the influence of an electromagnetic field, its distribution over the surface of the drum changes. Further, all this heats up and the toner simply "flows" into the surface of the page.
Therefore, high speed and low costs for consumables are the main advantages of the Brother HL 1110r laser printer. Refilling the cartridge allows you to solve the issue with its reuse and minimizes the cost of maintaining the printing system. But at the same time, the quality of the pages displayed on such a device is mediocre. Also, this technology has a fairly high energy consumption, which is due to the need to heat the selenium drum.
Cartridge and its features
The Brother HL 1110r laser printer is equipped with a TN-1075 model cartridge. One refueling allows you to count on output up to 700 pages. But at the same time, the starter cartridge, included by the manufacturer in the initial delivery list, is not completely filled with toner. Therefore, it can output up to 500 sheets.
There are two possible ways to refill today. One of them requires updating the printing system software, and the second is based on the replacement of special chips with an integrated counter. Since the second is simpler, it is precisely to him that they are mostly resorted to when performing this operation. It consists of the following stages:
- Removing the cartridge from the print system and disassembling it.
- Removing toner from containers.
- Filling with new powder.
- Cartridge collection.
- Removing the chip counter and installing a new microcircuit in its place.
- Reinstall the print cartridge.
- Display a test page.
Setting procedure
The basic sheet format on which the Brother HL 1110r laser printer can print is A4. Therefore, during the setup process it is recommended to display the test page on it. The procedure for preparing for operation of this peripheral system is as follows:
- Remove from packaging. Carefully remove the transport locks from its body.
- Install at the place of use.
- We connect to the power supply network and to a personal computer.
- Turn on the computer and printer.
- We start the installation of drivers from the CD. If there is no drive on the computer to read them, then download the software package from the manufacturer’s official website and install it.
- Reboot the computer.
- Open the "Start" menu and go to its "Settings" section.
- After that, select the item "Devices". Next, the interface of this section will open.
- Then go to the section "Printers and scanners".
- At the next stage, select a previously installed printer. In the menu that opens, select "Management". The next item is “Test Page Output”.
After that, this device is ready for printing various kinds of documentation.
Cost
The Brother HL 1110r Laser Printer is a very affordable device. It has a really affordable price. Its price is 7000-8000 rubles. Moreover, if you purchase it in the "global web", then the cost may even drop to 6500-6700 rubles. Well, in a specialized store or a local electronics supermarket, you can buy it for 7200-7700 rubles. The latest acquisition option is the most optimal. In this case, you can evaluate the state of the device, and make sure that it is working is not difficult. But when purchasing via the Internet, certain problems may arise associated with the delivery and possible absence of some components in the delivery list.
Reviews
The owners of the Brother HL 1110r laser printer are mostly positive. Customer reviews focus on a number of significant advantages with him. First of all, it is distinguished by its extremely low cost. This is a really affordable printing system, the price of which may not exceed 7000 rubles.
He also has a fairly high speed. This printer can print up to 20 A4 sheets in a minute. In addition, the cost of maintaining the printing system is minimized. The cartridge can be refilled with toner powder repeatedly. In addition to this, this peripheral device has compact dimensions.
Another advantage of such a device is its simple setup procedure. The number of operations performed during its implementation is minimized. That is, a beginner computer specialist with a low level of training can cope with him.
The disadvantages include high power consumption. It is due to the technology used in the printing system. Also, the disadvantages of the printer include a minimal set of connection methods. It is possible to connect to a personal computer only using the USB interface. There are no other connection methods. Another significant drawback is the small cartridge life, which is designed for 700 sheets. That is, 2-3 times a month it will be necessary to fill it with toner and update the chip for accounting for the number of pages displayed.
Conclusion
The Brother HL 1110r laser printer was reviewed in this review. Reviews, as previously noted, relate it to the budget segment. His technical specifications are appropriate. Although experts consider such printing systems to be unpromising, they are still in great demand. Often there is no need to purchase an MFP for the reason that most of the time the user prints the documentation instead of scanning the pages or copying them. Therefore, there is no need to overpay for MFPs. In this case, it is much easier to buy such a printer and use it for its intended purpose. It is for such cases that it is recommended to use Brother HL 1110r. This is the main scope of its application.