How to find a hole in an air mattress: 8 effective ways

An air mattress is an extremely useful and necessary thing in the household. This is a lifesaver in case of guests spending the night, an extra bed, when folded, takes up no more than a bag, an indispensable thing in the country, trips to nature. But if an air mattress lowers, how to find a hole? Sometimes searches are similar to finding a needle in a haystack. And if you try the proven methods that we want to offer you?

Method # 1: Valve Inspection

Many manufacturers of these products consider checking valves the best answer to the question "How to find a hole in an air mattress?" We advise you to do the following:

1. First of all, remove bedding and everything that will interfere with your searches.
2. Move the mattress into a well-lit, free from objects space - you will need to inflate it, turn it over and carefully examine it.
3. Fill the mattress with air as much as possible.
4. But now is the time to inspect the valve - it is he who is the main cause of all leaks. Make sure it is tightly closed. If the valve is double, then its plug must be firmly inserted into the base.
5. If there is a problem with the valve, then it will be difficult to fix it on your own. Try to fix the leak by inserting a thin sheet of plastic, cloth.
6. If there is no problem with the valve, it does not let air through, then how to find a hole in an air mattress? Let's move on!

Method No. 2: using a soap solution

We will act according to the following algorithm:

1. Add a little dishwashing liquid (soap solution, liquid soap, shower gel or shampoo) to the spray bottle so that there is enough soapy water on the entire surface of the mattress. An alternative to a “sprinkler” would be a sponge or cloth soaked in this solution.
2. How to find a hole in an air mattress at home? Fill it with air and spray, wipe with soapy water the entire surface of the product, starting again with the valve and paying particular attention to the areas of the seams.
3. Now watch carefully - where soap bubbles have appeared, and there will be a place for air leakage.
4. Circle the leak with a permanent marker, mark with a piece of tape or with a sticky sticker.
5. The next step is to 100% dry the mattress. Only after that he will be ready for storage and repair.

Method 3: visual and manual inspection

Another simple way that tells you how to find a hole in an air mattress:

1. Fill the product with air to the limits.
2. Carefully inspect the mattress from all sides for damage. Particular attention is given to the seams.
3. Moisten your hand a little in water and, piece by piece, slide your palm over the surface of the mattress. Drive as slowly as possible - a quick inspection will not produce results. In the place where the air will come out, you will feel a slight chill or even a slight breath on a wet hand.
4. Another trick is to also, examining site after site, press on the surface of the mattress, bending close to it with your ear. Perform the procedure in complete silence - only then you will hear a subtle whistle from a hole in the product. More attention - again to the seams.
5. Also mark leaky areas with a permanent marker or duct tape. Do not stop if you find one hole - examine the entire mattress, there may be several damage.

Method number 4: immersion in water

This method, which tells you how to find a hole in an air mattress, is not suitable for all products - some of them can not be completely immersed in water. Be sure to read the instructions from the manufacturer. If such contact is allowed, then follow the instructions:

1. Partially inflate the mattress with air, close the valve.
2. Fill a bath or pool with water.
3. Place the entire product under water.
4. First of all, click on the material around the valve - if water bubbles come out of it, then the problem is found.
5. Thus, pressing both hands on the surface, examine the entire mattress, immersed under water. Air bubbles will indicate a hole.
6. The non-hydrophobic permanent marker will help to mark the place of damage.
7. Be sure to completely dry the product before further storage and repair.

Additional methods

If all of the above does not help, then you can do the following:

• Some advise filling the mattress with smoke. This method is good for smokers of hookah or vape. When pumping air into the mattress, fill the space near the pump with dense smoke. And then watch the product. Where thin smoky trickles will come from, there will be damage.
• Download the application for determining the decibels of sound on your smartphone. In complete silence, slowly drive the device over the mattress. Where the scale will rise a little, and there is a hole.
• Fill the product with freon. You can find a hole using a special analyzer - a device for checking the condition of air conditioners.
• Fill the mattress with air saturated with aromas of air freshener, perfume, cologne or aroma candle. And then in another room already look for damage by smell.

How to find a hole in an Intex air mattress? The same methods are suitable for these high-quality products: valve inspection, soap solution, manual and visual inspection, immersion in water.

Do not pour water into the mattress in order to detect a hole through a fluid leak! You will not be able to dry the product from the inside - mold will multiply inside it and it will become completely unusable. We hope you find our tips helpful in finding the source of the problem.