The PLC adapter from Rostelecom is a device through which the Internet signal is transmitted over the electric network. Such equipment is an analogue of the classic Internet cable laying in an apartment or a private house.
Wireless network is now available in almost every house or apartment. The so-called Powerline adapters use electrical wiring as a data network. Despite the fact that this technology is considered obsolete and useless, it has considerable efficiency.
Today, 802.11n technology is one of the most common. The latest router models provide connection speeds of up to 1300 Mbps.
PLC- "" Powerline , . , , Wi-Fi .
Powerline-?
Powerline, , . , Powerline-, , - , . Ethernet, . , , , . Powerline-.
PLC- ""
: . Ethernet.
The connection diagram of the PLC adapter from Rostelecom is simple: one of the Ethernet wires is connected to the first adapter, the second to the router. Then the adapter is connected to the mains. A second Ethernet cable is connected to the HDTV connector , connecting the second adapter, which also plugs into an outlet.
Adapters are detected automatically, without a long process of configuring and installing drivers. The resulting connection is used to transfer data from the router to the TV through electrical wiring laid in the walls.Connection speed
The first standard was introduced in 2001 and had a low speed of 14 Mbit / s. The latest models of PLC adapters from Rostelecom support gigabit networks, which is highly appreciated by users.
Powerline-?
Powerline- , . — , , .
PLC- "" , . , Wi-Fi , , . Powerline- — , .
Powerline , — . , .
PLC- .
Powerline-
1920 . . , 50/60 Hz. .
Powerline- 14 /. , 200 /, .
, PLC- "", .
"", , . , Ethernet.
- - . http://192.168.1.1. .
- admin, .
- , «». — Wi-Fi .
- . «» — Mixed 802.11 B/G/N/. . — .
- Wi-Fi AES WPA2-PSK . .
- Compete "".
— LAN Setup. IP-. , IP- .
Powerline- . . Security 15 , NMK-. 3–4 .
The second adapter plugs into the electrical network. The Security key is also pressed on it for 15 seconds to reset the NMK key and generate a new one, then it is pressed again for 3-4 seconds. After that, the adapters are automatically connected to each other and the user can only check their operability.