If you are the owner of a Philips brand vacuum cleaner, then you should consider purchasing a replacement filter that will greatly facilitate your life and increase the efficiency of your vacuum cleaner. This product can be purchased in specialized stores, as well as on the manufacturer's website. The filter for the Philips vacuum cleaner is an important part that is of great importance throughout the process. So if you have a spare filter, then it definitely will not get worse. In this article you can find out what a filter for a Philips vacuum cleaner is, how much it can cost and what are its advantages and disadvantages.
Filter
Before considering any specific filter for a Philips vacuum cleaner, you need to figure out what it is and what these filters are for. In a vacuum cleaner, most often there are two of them: one input, and the other output. The first filter is responsible for ensuring that large particles of dirt do not get inside the vacuum cleaner, being sifted out at the inlet. As for the second, it, in turn, is installed where the vacuum cleaner releases air for cooling. You can often hear that in the room after using the vacuum cleaner there is a characteristic unpleasant odor, from which it becomes difficult to breathe. The reason is that the output filter is dirty and no longer filters the air that comes out of the vacuum cleaner. And you can imagine what kind of air is inside the vacuum cleaner. Accordingly, the presence of both filters in this device is extremely important. That is why you should pay attention to what products the official manufacturer offers you. The replacement filter for a Philips vacuum cleaner is mostly just a weekend.
HEPA Output Filter
The first product worth paying attention to is the HEPA 13 output filter , which is the most effective for vacuum cleaners from this manufacturer. It traps 99.9 percent of the smallest particles of dust when it releases air outside. The result is that even cleaner air comes out of the vacuum cleaner than the one in your room. If you use such a filter, it is recommended to replace it once a year so that its effectiveness is not lost. The cost of the product is about 2 thousand rubles, so you can safely buy a HEPA 13 filter in advance so that you can replace it at the right time. Please note that this filter must not be washed; if you do this, you may damage it, which will lead to its unsuitability.
HEPA 10
Another product from this line is the HEPA 10 filter, which is a precursor to the product described above. If you want to save, then you can purchase this version of "Hepa". The filter is also quite effective, but at the same time it is still significantly behind its more modern friend. Naturally, they differ in cost - this option costs almost two times cheaper than the previous one. The terms of use remain exactly the same, so you can choose which option is more preferable for you. Both filters operate at a very high level and will last you a whole year, this is a distinctive feature of the HEPA line. The Philips filter, however, may not be the only one.
Filter for robot cleaner
You can also purchase a filter kit for SmartPro Robot Vacuum Cleaners. Such a kit costs about a thousand rubles, and it immediately includes two filters. However, immediately pay attention to the fact that these filters must be changed much more often - every four months. Accordingly, you need to carefully monitor how long you used one product in order to change it to another in time, otherwise the performance of the robot vacuum cleaner will drop, the air will become much more polluted, and the life of the device may well decrease.
Accessory kit
Separately, it is worth considering a special set of accessories, which costs a little more than a thousand rubles. It includes three units at once - a special EPA filter and two standard output filters. As you can see, you can seriously save money if you decide to purchase such a kit. The EPA filter is an input filter, and it is designed to protect the electric motor, due to which the vacuum cleaner operates, from the effects of dust particles entering the device.
Also included is a special sponge insert, which is installed with the filter to significantly increase engine protection. The filter itself can be washed, unlike the HEPA output filters. But the sponge insert must be replaced once a year - it is not recommended to wash it. As for the output filters, there are two of them in the kit, as already mentioned above, and each of them works for a whole year. Again, you are not recommended to wash them, since in the process you can damage them, and then their further use will not be possible.
As you can see, for a fairly small price you get a whole set of useful filters, so this offer can be considered as very profitable.