This article will answer the question of how to connect a dishwasher. When it is built into the working kitchen area, sewage, power supply and water are connected directly to it. But if the equipment was purchased separately, then how to connect the dishwasher will have to smash his head.
The first thing for this element of household appliances is to find a suitable place. In order to avoid excessive load on the pump and not to extend the sewer hose, it is advisable to position the machine closer to the sewer. Water and electricity can be renewed without any consequences.
How to connect a dishwasher to water
In most modern homes, the water supply system is made of metal-plastic or just plastic. Crashing into it is not a big deal. The main thing, before installing the dishwasher, turn off the main tap for supplying water to the house. Choose a place closer to the device and install a tee, after which the crane will go. This will help to quickly shut off water in the event of a breakdown. In addition, the inlet valve located inside the dishwasher may fail, then the apartment will be flooded. It is worth paying attention to the fact that modern representatives of such household appliances are equipped with flood protection, and it is called differently by each company. This parameter should be considered when buying.
If your house has iron water supply, it is recommended to install a rough water filter in front of the machine, because the mechanism of this technique may fail from rust. If there is not enough hose length to the tap, it must be replaced with a longer one. This option, although not very cheap, but reliable. A more economical solution may be to purchase extension cords.
How to connect a dishwasher to the sewer
Waste water is removed through a flexible hose, which can be increased if its length is not enough. The main thing here is not to overdo it. The hose can be extended no more than 2 times to avoid a heavy load on the pump. Another option may be to connect the pipe itself to the machine. In addition, you can connect the drain of the dishwasher to the siphon of the kitchen sink if it has a tap for this purpose. To prevent dirty water from flowing back into the machine, it is necessary to pull up the hose just above the siphon, making a horizontal bend.
How to connect a dishwasher to electricity
To do this, it is recommended to make an individual outlet with a gun, which will go directly from the meter. The socket must be earthed, and the cable must have a cross section of at least 2.5 squares or with three cores. This is due to the fact that the dishwasher has a lot of power. It is necessary to open the counter and find the phase of the main cable to the apartment and zero using an indicator screwdriver. After the machine is connected to it, it is displayed in the kitchen. After it already follows the outlet itself. After washing the dishes, turn off the machine, and only then take it out.
And the most important thing when installing a dishwasher is to set it in level. There are two main ways. If you plan to hide the equipment under the desktop or in the cabinet, then the level can be set by the method of samples, determining the degree of vibration during machine operation. Another way involves screwing the legs all the way and creating a platform for a household appliance clearly in level.
Before you start, do not forget to read the instructions for the device. Good luck