When playing sports or dancing, it is very important that the shoes fit tightly on the foot. This does not mean limited movement and excessive crowding. Additional discomfort should be eliminated. First of all, the convenience and degree of fit depends on the option of the fastener. Most often, for example, for sports shoes laces are used. And there are a great many options for tying them. In this article, you will find several ways to lace up sneakers. Weave options are described as step-by-step instructions for execution.
The history of modern lace
Thin strings for attaching shoes to the foot were used by the ancient Greeks. But only at the end of the XVIII century, the smart Englishman Harvey Kennedy guessed to put the shoelaces through the holes and twist them together. The main convenience was that with the help of them it was possible to adjust the degree of fit, providing the foot with the necessary comfort. At that time, the innovation did not cause much enthusiasm among the public, since more attention was paid to the elegance of the fasteners and the beauty of the finish. And only after some time a new idea gained distribution. Especially liked sports and outdoor enthusiasts. Today, of course, every student knows how to lace up sneakers or shoes. And the kids make their first attempts to thread the ropes through the holes even in kindergarten age. For them it is both an exciting game and hard work. And later the guys often even compete among themselves how to lace up sneakers in a stylish and fashionable way. Although the main thing is beauty, convenience and practicality are all the same.
Different ways of lacing
With a wide or swelling foot
To provide the greatest comfort, you need to reduce the tightness at the beginning of the lacing and slightly increase to the ankle. To do this, thread the shoelaces in the first few holes of the sock parallel to each other, without crossing. Around the middle, the binding should be cross-shaped. With the movement of the foot will not be too tightened in its lower part.
With a narrow foot
How to lace up sneakers, if they seem a little loose, although they were just right when buying? Do the work in the exact opposite of that described above. Lower cruciform bindings provide the greatest fit. And in the upper part one or two parallel “stitches” will be enough.
High rise
To relieve shoe pressure, use the horizontal direction of the laces. Outside, the bindings will look like transverse stripes, and the inside will be cruciform. Such moderately loose lacing will not be too tight and will provide the greatest comfort with a high rise of the foot.
What is the hallmark of lacing Nike sneakers ?
This brand is considered primarily sports shoes. Therefore, you need to remember the convenience during active exercises, excluding distractions. Among the main ones is the determination of the place where the ends will be tied. How to lace up Nike sneakers while ensuring no loose ropes To do this, work must be done so that the direction of penetration into the uppermost shoe holes is not outward. Both shoelaces threaded this way will end up inside the shoe. Bring them together under the tongue and tie. The free ends do not need to be brought up after that. Usually, they are carefully tucked under the edge of the sneakers, while protecting them from flying bows, which can interfere with walking or running. The same rules apply to how to lace up Air Max sneakers, which are the most popular of the entire branded shoe series. Tight foot mount and additional cushioning due to the air cushion inside the sole provide increased comfort and convenience.