When assembling a PC, upgrading it, and repairing, sometimes you need to install a hard drive on your computer. Consider the basic rules and requirements that must be considered in order to get an excellent result, spending a minimum of time.
The main stages of installing a hard drive
The most common reason for installing a new hard drive is the failure of the previous one. In this case, the replacement process is surprisingly simple. To begin with, of course, you need to open the system unit cover, for which first unscrew the 2 fixing screws on each wall of the rear side of the case (it is better to put the screws in sight so as not to lose them). Next, you need to disconnect the burned-out hard drive from the power cable and data bus, release it from the mounting screws and remove it.
, . , , . , . . , ,
, , , , .
, , . , , , .
, , , , .
, , , , . : SATA IDE, IDE- DVD-. .
IDE, . , , , . SATA, IDE , , .
- , - . IDE 133 /. SATA1, SATA2 SATA3 150, 300 600 / .
IDE ( ), SATA- .
IDE — — Master/Slave, BIOS, .
, . , .
. , . – . . , .
. , , . , , , . .
SATA
IDE, SATA . , .
SATA : . , , , , - .
SATA- . : , . , .
SATA . SATA-1, 2 3, , .
. , .
, , , .
IDE-, SATA- . IDE- Molex, SATA- – .
, SATA . , , . ?
. IDE-SATA. , . , , , , . , , ?
, , . , - , ( ) - . - , , .
? . , . , . , . , , , . . .
– , . , .
SATA . , . , . , SATA- , .
?
, , , , , .
IDE – . . Master, - Slave. SATA .
. , . , . , , , .
, . , . . . .
Recently, they began to attach the appropriate instructions to the hard drive, which says how to install a hard drive on a computer, so if you additionally look there, there should not be any difficulties in the process. After the work done, make sure not only to connect the cables correctly, but to lay them carefully so that they do not stick out. If possible, bring them farther inward, and if necessary fasten with electrical tape or plastic ties.