One of the key questions that most personal computer owners have to solve is: “How to set up sound on Windows 7?”. If before the only sound source was a system speaker, now manufacturers offer good multi-channel solutions.
However, their potential may still remain unrealized if you do not know how to set up sound on Windows 7. This problem can be solved in various ways, the choice of which depends on the requirements of the user himself. So, one is enough for the system to play at least something, the other wants ASIO support, and the third, reading how to set up sound on Windows 7, seeks to achieve deep and clear frequencies.Start
The audio adapter, or sound card, is responsible for outputting and processing sound in any computer. Physically, it can be a separate card from a PCB, on which microcircuits and strapping elements are placed. A comb of sliding contacts is provided for connecting to the connector on the system board. This solution is called discrete, it often allows you to achieve acceptable sound quality.
The second option is an embedded device. It lies in the fact that the chip is placed by the manufacturer on the motherboard, so some elements (power) are used together. Simple and cheap. However, the quality is not always up to standard.
, – . , , Windows 7, , ( ) . , .
: , , .
«». , . .
Recently, there are more and more of them, since even video cards are endowed with the ability to output an audio stream. All unnecessary components in the list must be disabled (right mouse button).If you now point to the main device, then the "Properties" and "Configure" buttons become active. In the settings you need to specify the desired mode of operation - stereo or multi-channel. By the way, setting windows allows you to more conveniently place elements on the screen - to see what is configured and what for.
After that, you need to open the "Properties". Here in the improvements tab you should disable (!) All unnecessary. Unless you can leave tone compensation and the equalizer (for lovers of high or low frequencies).
The Advanced tab allows you to specify the output format. It is noticed that if something other than “16 bits, 44 KHz” is set, then the equalizer is inactive after each reboot. For all other cases, it is recommended that you select “24 bit, 96 kHz”.
Sound tuning on a laptop is done in a similar way.