If the lighter runs out of fuel, then you probably have a question: "How to refuel" Zippo "?" The fact is that in addition to how to do this correctly, there is also the problem of choosing the fuel itself. After all, if you use low-quality, then you can easily lose the lighter itself. This article will help you learn not only how to refuel Zippo, but also how to choose fuel.
A bit of history
In 1932, George Blaysdell opened a Zippo lighter manufacturing facility. Over 86 years of operation, Zippo has released thousands of different models. The main features of these lighters are durability, wind resistance and a lifetime warranty. By the way, even today the plant and its intermediaries around the world are exchanging broken lighters for new ones. Thanks to these advantages, Zippo gained worldwide fame and from a small production, where only six people worked, grew into a full-fledged factory with a large number of employees. All lighters are manufactured in only one factory, which is located in the state of Pennsylvania in the USA.
How often do you need to refuel
Surely you are concerned not only with how to refuel Zippo, but also how often you need to do it. Of course, it depends on how often you use the lighter. But there is one peculiarity: oil distillate is what fuel is made of, it gradually evaporates. It follows that if you do not use a lighter at all, you will still have to refuel it. To keep the fuel evaporating less, always keep the cap tightly closed and protect the Zippo from excessive heat and sun.
If you use the lighter actively, then on average there will be enough fuel for one week. It also depends on how long you keep the flame lit.
How can I refuel a Zippo lighter
The design of these lighters is designed to use highly refined gasoline and butane. Therefore, if you are thinking about how to refuel Zippo, be sure to consider this. Use only original fuel - Zippo Premium Lighter for gasoline and Zippo Premium Butane for butane lighters. With it, the lighter will light up the first time and hold a steady flame, such fuel has less odor and the lighter does not smoke with it. If it is not possible to buy the original, then purchase third-party fuel only premium. When using cheap analogues, the cotton filler is quickly contaminated with burnt resins, the wick itself also burns faster. There is another point why you should not use cheap fuel. The plant reserves the right not to make warranty service in the event of such a fact.
How to Fill Zippo Lighter with Butane
If you have a gas lighter, then use this instruction:
- Turn the lighter up so that the refill valve is at the top.
- Insert the nozzle of the gas cylinder firmly into it.
- Squeeze the balloon twice.
- Then flip the lighter back and wait a few minutes.
It is important that the contents do not get on the skin during filling, as the liquefied gas has a low temperature, which can cause burns.
If you figured out how to refuel the Zippo and did everything according to the instructions, but the Zippo does not light up, it means that a steam plug has appeared. The air just got into the tank. This happens if you did not turn the lighter up before refueling. In order to correct this circumstance, turn the lighter upside down and press the intake valve with something sharp, then refuel it.
How to refuel Zippo with gasoline
- Remove the inside of the lighter from the housing.
- Turn it over. On the bottom you will see a felt lining that says "Lift to fill", which translates as "lift to fill up".
- Lift the felt pad around the corner so that the cotton balls inside are visible.
- Open the gas can. If this is the original fuel, then you need to pry the spout of the canister with something sharp. Many make it a lighter body.
- There is a hole in the middle of the lining, insert the spout of the canister there.
- When the cotton balls are saturated with fuel, refueling can be completed.
- There is a second way, in this case you lift the edge of the felt lining and pour fuel directly.
- After that, refuel the corner and, turning the lighter over, insert it into the body.
In order to understand that the lighter is full, just add up to 10 during fueling. This time is enough to keep the tank full.
But this is if the lighter was empty before. If a certain amount of fuel is present inside the fuel before refueling, then determine the fullness by how much cotton balls have been saturated.
In addition to the question: “How to refuel a Zippo lighter?”, You may be interested in replacing the wick and silicon. This is done easily, just follow the instructions below.
Silicon
Replace silicon once every few weeks. It is done like this:
- Take out the inside of the lighter and turn it over.
- Loosen the screw next to the felt pad.
- There is a spring inside, take it out. Then lightly tap the lighter on a hard surface. If silicon still remains, then it will fall out.
- Insert the new silicon first, then the spring into the hole.
- Screw the screw back.
Wick
If you see blackness on the wick, do not rush to change it. To get started, just trim it. It is done like this:
- take any tongs and pull up the wick until a clean part appears;
- then cut off its tip at the top where the windbreak begins.
This can be done twice, after which the wick will need to be changed.
How it's done:
- Remove the inside of the lighter from the housing.
- Turn over and remove the felt first, then remove the cotton balls.
- Then through the top insert a new wick.
- Lay it in a wave-like fashion, gradually filling the lighter with a cotton pad.
- Insert the felt back.
Now you know how to refuel Zippo. When you follow all the instructions, the lighter will serve you for a very long time.