Tile is the most common and durable option for finishing a bathroom. Put in accordance with all the rules, it will protect the walls from the appearance of fungus and mold. In addition, it is very easy to care for - the smooth surface of the tile is resistant to almost any chemical detergent.
Ceramic tiles are also loved for the variety of color schemes and textures. To create a unique bathroom design with such an assortment is not difficult. And in order for the tile to reliably protect the bathroom from water leakage, it is necessary to choose the right ceramic corner for the bathroom. Moreover, it is not enough to choose such a border - it should be qualitatively installed.
Ceramic corner
The main purpose of this accompanying element is to hide the gap between the bathroom and the wall. And only then - a decorative function, which, incidentally, also carries a border. The ceramic corner for the bathroom in combination with the tile looks more elegant and presentable, it is much more reliable and does not lose color over time, unlike plastic. In addition, both the tile and the border are made of one material, which will eliminate the additional difficulties in installing the corner.
Choosing a ceramic corner
It will not be difficult to choose a suitable design for the bathtub border - manufacturers almost always include such additional accessories in the collection of ceramic tiles. When buying, it is recommended to pay special attention to the following characteristics that a high-quality ceramic corner for a bathroom should have:
- Water resistant.
- Resistance to external mechanical and chemical influences.
- Lack of harmful substances.
- Possessing the simplest design.
Before purchasing, carefully measure the length and width of the bath, as well as the size of the gap between it and the wall. According to these parameters, select the required footage and scale, which should have a ceramic corner for the bathroom. Photos on the pages of online stores will not tell you much, so it’s better to look for goods among “live” samples in ordinary building stores and salons.
Necessary tools
The following tools and materials will be required to install the curb :
- Solvent.
- Ceramic tile adhesive or liquid nails.
- Silicone sealant.
- The gun for sealant.
- Special crosses for tiles.
- Masking tape.
- Wide and narrow spatulas.
- Bulgarian.
Installation of a ceramic corner
Ceramic corner for the bathroom can be installed in two ways. The laying technology in both the first and second versions is quite simple. However, during installation, it is imperative to observe several basic rules that combine them, and also serve as the key to long-term and trouble-free operation:
- Thorough cleaning and degreasing of surfaces with which the installed border will come into contact.
- If there is mold, remove it without residue and treat the walls with antiseptics.
- Installation of the side only after tiling the walls.
- Sealing the gap with sealant and grouting over it for better waterproofness.
1st method of mounting the corner
A masking tape is glued around the perimeter of the junction of the bath with the wall. Its purpose is to protect the edges of the thicket he hit the foam. For best results, it is recommended to leave a slight indent from the edges of the bathtub, literally 2-3 millimeters. Construction foam is poured into the gap and left until it dries completely. Depending on the brand, the latch can harden from 2 to 12 hours, and in this interval it is better not to wet it. After the recommended time, the excess foam is cut off.
It is necessary to dilute the glue, with the help of which the ceramic corner for the bathroom itself will be directly attached. Cut the border with a grinder and pre-lay it as it is supposed to be placed on the bathroom. In the absence of special angles, fit the long parts of the side to each other, cutting them at an angle of 45 degrees.
Glue is applied to the corner along the entire length, distributed by a spatula. Then the border is applied to the junction of the wall and the bath and is slightly pressed. Make sure that there are no distortions - subsequently it will be impossible to fix them. In the places of formation of gaps between the elements, put crosses.
After a day, masking tape can be removed, seal the remaining cracks with sealant and cover them with grout for tiles.
2nd way of mounting the corner
This method involves installing a corner without foaming the slit. The whole process is greatly simplified, and the time of work is reduced. This method is only suitable if there is no gap between the bathroom and the wall or it has very small dimensions, and the bowl itself should never stagger.
Stir glue, cut the border. Sealant is applied to the joint and waiting for its solidification. The ceramic corner for the bathroom is covered with glue and fastened to the place of contact. The final stage of work is the processing of the remaining slots.
In the absence of the possibility of either money to purchase such a necessary accessory as a ceramic corner for the bathroom, you can make it yourself from the remains of the tile. It is cut into even strips in the required quantity, the edges are treated, and then fastened to the joint between the wall and the bathroom in the first way. The only difference is that in this option you will need especially careful processing of the seams.
If you could not find a ceramic corner matching the shade, the white color of the curb for the bathroom will be the most optimal - most bowls have just such a color.
Having spent quite a bit of time, money and effort, you can give the bathroom a complete and neat look. A corner made of ceramics will serve faithfully for quite a long time, reliably protecting the space under the bathtub from harmful effects of moisture.