HP LaserJet 1000 Series Printer. Options, specifications and tuning algorithm

The HP LaserJet 1000 Series printer belongs to the budget document management system group. It is based on the laser page output method. It has high performance and minimal expenditure on consumables. Its features will be further considered.

HP LaserJet 1000 Series Printer




Equipment

A very typical delivery list for this model of peripheral device. It includes the actual HP LaserJet 1000 Series laser printer. For Windows 7 and earlier versions of the operating systems, there are bundled drivers that can be found on the CD-ROM. But later versions of the OS have integrated such software. It also has diagnostic programs and documentation. The latter can also be found in paper format. The delivery list also includes a warranty card and a start cartridge. This entire set is complemented by communication wires.

HP LaserJet 1000 Series for Windows 7




Specifications. Technology

As previously noted, the HP LaserJet 1000 Series printer is based on the laser page output method. It allows you to quickly display pages, is very economical in terms of supplies.





The speed of this model of peripheral device is 10 pages per minute. In this case, the printer will spend 15 seconds on the output of the first one-sided sheet.

Actual print resolution is 600x600. But when HP Ret technology is activated, the latter value will increase to 1200x1200. Of course, such a solution can improve the quality, but not enough to display pictures and images in monochromatic format.

The monthly limit of the device is 7000 sheets. One refill of the cartridge lasts an average of 3000 pages. That is, refilling the printing system will be needed 2-3 times a month.

The patch kit for this printer includes only one connector - USB. That is, such a printing system cannot function independently. But the modest set of ports for connection is easily explained by the limitation of the release of this device.

When printing pages, this printer consumes 214 watts. In idle mode, this parameter is reduced to 7.6 watts. This activates the Instant-on fuser mode. It is he who provides such a high level of energy efficiency of this peripheral system.

The main place of application for such a printer is a small office with the number of workplaces from 7 to 9. It can also be used with success in a copy center. If there is no need to display pictures or images in color, then such a peripheral device is suitable for home use.

HP LaserJet 1000 Series Printer Driver




Customization: Features

The printing system setup algorithm is as follows:





  1. Install the printer at the place of use.
  2. We commute it.
  3. Install the cartridge.
  4. Turn on the control PC and printer.
  5. After that, the driver for the HP LaserJet 1000 Series printer on Windows 8 or later is installed automatically. In other cases, it must be installed from the disk.
  6. The next step is to restart the computer.
  7. Next, print a test sheet, and after that the document output system is ready.

Cost. Device Opinions

The HP LaserJet 1000 Series printing system was released a long time ago by the standards of the computer industry. It has already been discontinued, and its stocks have been successfully sold out. Therefore, such a laser printer in a new state cannot be purchased.

But in a used state, such a documentation output device can be bought without problems. It can be found on various Global Web sites. Moreover, its cost is 1500-2500 rubles. Of course, in some cases, you may need to replace the cartridge with such a purchase. But this is a significantly lower cost than buying a new laser printer. At the same time, the hero of this review will serve for more than one year.

The advantages of this peripheral device are as follows:

  1. Reliability.
  2. Low cost.
  3. Increased performance.
  4. Simple setup algorithm before use.
  5. Sufficient equipment.

Only one minus is the impossibility of buying a printer in a new state.

HP LaserJet 1000 Series




Conclusion

A truly high-quality and reliable peripheral is the HP LaserJet 1000 Series. Therefore, even in the used state, it is still relevant. Such a printer will last for more than one year. In addition, he has minimal maintenance costs. For the previously mentioned cases, it is just fine. In this case, you can significantly save now on its acquisition due to the fact that the price of such a printing system is really affordable and affordable.




All Articles