There are many tools that help make knives sharp. For example, you can apply cyl
Indr of metal with diamond dusting. It is presented in the form of a small file with a circular cross section. However, often after such processing, the knife blade requires additional editing. Such a device for sharpening knives, as a sharpener, consists of several disks arranged in a housing. For this purpose, special abrasive stones can be used . Naturally, the choice of such a device depends on your own preferences, capabilities, as well as the reputation of the manufacturer.Quite popular is the device for sharpening knives "Lada". It can be used even by people who do not yet know how to correctly set the angle of grinding of the blade. In addition, the device can grind not only knives, but also other tools. The manufacturer of this device is trying to constantly improve it. The virtue of the up
Parata is that it does not require a lot of physical strength, since the knife is well fixed. And the device is well attached to the surface of the table, so you can make all sharpening techniques very simply and quickly.
, . . , , , . . , , , , .
.
At the beginning, it is necessary to process the wooden blocks so that they have no burrs and also become even. To do this, use a planer and sandpaper. Now we mark the bars. Depending on the angle at which the cutting part of the knife is sharpened, we draw the corresponding line on the wood.Now it should be noted the width of the grindstone, attaching it to the mark. At the second end of the wooden block, we make a mirror image of the lines. Further, the knife sharpener is constructed very simply. The cuts should be made along the lines, the depth of which will be 1-1.5 cm. For this, it is advisable to use a cutting blade with small teeth. Saws are made on two bars. Irregularities in the holes must also be removed with a sandpaper.
Now you can insert abrasive bars into the cuts and fasten them with bolts. Naturally, the grooves should coincide with the grinding elements. It is advisable not to make them larger than the width of the bars. If you want the device to stay firmly on the table surface, you can attach suction cups to the bottom surface of the tree or nail a piece of rubber that will prevent slipping. The homemade knife sharpener is ready to use. Good luck