To ensure reliable heat and sound insulation, windows and doors need to be sealed with gaps with a sealing profile. How to choose and install rubber seals? We will talk about this in this material.
Material quality
Rubber is an extremely common material widely used in industry. If we talk about the rubber seal for windows and doors, the latter has good elasticity, is able to withstand the effects of low and elevated temperatures, the influence of other environmental factors.
The service life of a sealing profile made from this production base is about 10 years. However, only subject to proper periodic care.
Seal Care
To reduce the likelihood of dust, dirt, and cold entering the room, rubber seals must be periodically wiped with a damp sponge during use. Also treating their surface with a special protective agent based on silicone is not superfluous. Alternatively, glycerin can be used as a replacement for silicone. In order for the rubber seals to last as long as possible, it is recommended to perform the procedure at least twice a year.
Rubber Seals - Features
The sealant acts as a hardware element of the window and door profile. The list of his main tasks includes:
- prevention of penetration into the room of extraneous sounds and smells;
- prevention of drafts;
- joint sealing - ensuring reliable joining of structural elements.
Benefits
What are the advantages of a rubber window seal? First of all, such profile products are characterized by endurance and special durability. An important factor for the bulk of consumers remains the low cost of such products.
Sealers in this category are made from rubber resistant to acidic influences. Such material is characterized by high-tech performance and, therefore, excellent quality.
Preparation for installation
You can install rubber seals yourself, without resorting to the help of specialists. However, before starting work, it is necessary to remove the old insulation profile.
To cope with the task is not so difficult. It is enough to use a sharp blade or a spatula. After releasing the grooves from the old seal, the surfaces must be cleaned of dirt and thoroughly wiped from dust. This is required for better docking of the adhesive solution and, accordingly, the implementation of the qualities of the future profile.
Installation of self-adhesive seal
Self-adhesive rubber seal profiles are much easier to install than products that fit into a groove. For installation, you just need to rid the device of the protective coating in the form of a tape, and then proceed to sticking it around the perimeter of the window frame or door leaf.
If the self-adhesive rubber sealant does not adhere sufficiently to the surfaces, to ensure reliable joining, the joints can be further treated with glue or sealant.
When replacing the sealing profile, it is not recommended to resort to the use of individual pieces of material. Since in this case, the probability of insufficiently high-quality sealing of joints increases.
Particular attention during the installation should be given to the overlay of material in the corners of the structures. It is in these places that the risk of poor-quality bonding and wrinkling of the seal increases significantly.
Useful Tips
There are a number of recommendations that can be beneficial when installing a sealing profile:
- When sealing the entrance doors that open onto the street, it is advisable to resort to installing several layers of rubber sealant. Moreover, one of the layers should be applied directly to the door frame.
- When buying branded windows or doors from trusted manufacturers, the seal must be included. Therefore, before you pick up a purchase, you should once again check its availability.
- For reliable fixation of the rubber sealing profile, use silicone glue. The application of this approach to installation contributes to the most reliable sealing of joints.
- It is highly not recommended that the sealant be applied to freshly painted surfaces. For a good fit, it is desirable that at least two weeks pass from the moment of painting.
As you can see, just a few simple steps separate a person from creating comfortable conditions for living in your own home. At the same time, for the seal to last as long as possible, it is necessary to ensure regular care of the material at the joints.