1C - a program designed to automate the activities of any enterprise. This utility many times simplifies many actions within the enterprise. However, users of this product have repeatedly noticed that 1C sometimes slows down. There may be plenty of reasons for this, and it is not at all necessary that the matter is in the program itself. It is likely that you do not match all the system requirements necessary for the program to function normally, but sometimes other reasons for the slow operation of this utility also appear.
What are the minimum system requirements for 1C?
As for all other software products designed for the computer, there are also minimal system requirements for 1C. We will analyze them now.
System requirements for 1C:
- kernel speed: 2.4 GHz (for the client server), 3 GHz (for the file value);
- memory (RAM): 8 GB (file version), 4 GB (for client server);
- Internet connection speed - at least 100 Mb / s;
- free memory on the hard drive - at least 2 GB.
If at least one of the above system requirements does not match your computer, then the 1C program will either not start at all, or it will work inhibited.
Where to see data on Windows 10 or 8?
In order not to miscalculate the compliance with the system requirements 1C with the data of your computer, you must check them before installing the program.
How to view system data on Windows 10 or 8:
- Turn on the computer.
- Wait until it is fully loaded.
- Right-click on the leftmost little window icon in the corner.
- Select "System" in the context menu.
Done. Before you opened a window with all the data on your computer.
Where to see data on Windows 7?
In this case, you can see the requirements simply. You need to follow these instructions step by step:
- Turn on the computer.
- Wait until it is fully loaded.
- Click on the leftmost icon in the corner in the form of the Windows 7 logo in the circle with the left mouse button.
- You will see a pop-up menu consisting of two columns. In the second column, right-click on the "Computer" section.
- In the pop-up context menu, select "System".
Done. Before you opened a window with all the data on your computer.
The inhibited operation of the utility is possible if all system requirements are met. Why does this happen? If you have 1C slows down and at the same time all the system requirements of your computer are met, then the reason may lie elsewhere. Now consider the possible problems.
The need to conduct routine maintenance in the database
If 1C slows down in a small company (for example, 6-7 computers), you can try to carry out routine maintenance in the database. How to do it right?
To do this, you must:
- Make a program start in the "Configurator" system.
- Go to the "Main Menu" and select "Testing and Correction of the Information Base" there.
- Check all items except "Check referential integrity of the infobase".
- There, select "Testing and correction."
- Click on "Run" (in the upper right corner of the window).
- Wait for the end of the configurator (15-60 minutes, the configurator will conduct testing and correction).
After completing this procedure, the program may stop braking. If this does not happen, you will have to look for another reason why 1C slows down.
Making a client-server connection
You can try to make a client-server connection without using additional software.
To do this, follow these steps:
- Choose a less loaded stationary computer among other 1C programs connected to the system (the network connection of the computer should be at least 100 Mb / s, and the RAM should be more than 4 GB).
- Activate IIS (Internet Information Server). Click on the Windows system icon with the left mouse button and select "Control Panel" in the second column. Next, you need to select programs and components, and in the same place, "Turn Windows components on or off." Then in the file system that opens, go to "IIS Services" -> "Internet Services" -> "Security".
- After that, it’s worth checking all the items with checkmarks, except for these two - authentication with client mapping and authentication with IIS client mapping. In the same file system, go to "Website controls." Next, check the "Management Console" and "IIS Management Service".
- You must close the file system and publish your database.
- It is necessary to configure access to the database on users' computers. How to do it? Now we will tell. First you need to open the launch window, then change the values to your working base (name and address of your base). Then you need to select "On the web server" and specify the working IP of your working base. Enter the name of your created database and click "Next". In the next window, do not change anything except “Main startup mode: thin client”. The last thing to do is click on the “Finish” button. After the operation, you will forget that you have ever slowed down 1C.
Braking in the work of version 8.3. Why is this happening and what to do?
The reason for braking the work of 1C 8.3 may be the work of background and scheduled tasks. This is one of the most common reasons why 1C 8.3 slows down from the very first start of its work.
The fact is that when starting 1C, various tasks and regulations are automatically launched. However, not all running regulations and tasks are necessary for the normal operation of the program. Since in the automatic mode a rather large number of tasks and regulations can be turned on, the system is loaded with additional work, which can entail 1C inhibition.
How to disable background and scheduled tasks:
- Go to the list of tasks and regulations (open the "Main Menu", select the "Administration" section, click on "Support and Maintenance". In the window that opens, select "Scheduled and background tasks").
- Analyze each scheduled and background task, which one is necessary for your work and which is not.
- In turn, open all unnecessary rules and tasks and remove the checkmark from them with "Enable", and then by clicking on "Save and close" exit this schedule or task.
After all unnecessary background tasks and regulations have been disabled, 1C 8.3 will stop braking or, at least, will make it much weaker.
What is taught in the courses?
Currently, 1C courses are becoming increasingly popular. This is primarily due to the fact that this system has spread widely to Russian firms. Almost every company or company has its own automation system, and 1C is currently the leader of such programs.
However, far from everything can be taught in these courses, since 1C is a rather large software product that requires experience with it. And 1C courses most often last no more than 2 months.
You will learn some basics. That is, how to run the program, how to work with documentation and other standard functions of this utility. In the future, you can solve various problems that arise in the process. For example, if the 1C file database is slowing down for you, then here you can only help yourself. By the way, some points regarding the inhibition of this program are also discussed in detail in our article.
Program Guide
There are a huge number of ways to independently master 1C. Starting with books and discs and ending with video lessons in online mode. However, the most popular was the self-study course: "1C Tutorial." It is a pretty good knowledge base if you easily learn new material and do not need constant instructions on how and what to do.
In "1C Self-Tutorial" provides video lessons with a visual demonstration of how and what to do. You just need to repeat the actions shown in the video tutorial. In the same place, in these video tutorials, you can find how to configure 1C. This is devoted to a whole section with the title: "Configuring 1C."
Program errors
As in any other software product, when using 1C, windows with errors in the operation of this program may appear.
It should be noted right away that errors in 1C are associated in most cases with the use of an unlicensed product. So, here are some errors that most often appear on the screen and do not allow you to fully work with the utility:
- DBMS error. Internal error dbeng8. It makes itself felt when confusion occurs in the used versions of the 1C program. Appears mainly in the file version. Since the use of different versions in the client server is basically impossible. The error is fixed by updating version 1C to the latest release. If the update does not help, then you need to use Testing and correction (the instructions are given above), or you can use the upload and download to a clean database.
- Error in the platform 8.3.4.428. This error cannot be fixed. It will be fixed by developers in the next versions of 1C.
Along with errors, the 1C program may be buggy, or any necessary actions are not performed. Next, we consider examples of 1C malfunctioning.
Offset of program elements and their overlapping
A common problem and not only in the 1C program. The solution is quite simple. You just need to clear the program cache and restart the computer. The problem will be solved.
You can enter the program from one computer, and you cannot from another
It may happen that there is no access to the program from other computers, but you can go in and use 1C from only one computer. First of all, you need to see if the shared access to the database is worth it. If not, check this box.
If this does not help, then you need to clear the cache or log in from another account (under a different user). Under one user, you can use more functionality of the 1C program than under another.
In this situation, there are likely to be limited use rights. You must configure user rights and configure user rights. If this does not help, you will have to clear the program cache.
When performing a certain action, throws it to the configurator code
This problem is relevant mainly for self-written (atypical) configurations. Most likely, it was spelled incorrectly.
If 1C gives a similar error on standard configurations, then you can try to clear the cache. If this does not help, then most likely this is a mistake of your installed release. With some knowledge and experience, you can dig into the debugger and see what is wrong.
Attention! Self-editing and other actions regarding the debugger are not recommended unless you understand this kind of settings of the 1C program. It is better to use the services of specialists (1C programmer).
The database opens only in the configurator, but does not open in user mode
To solve this problem of starting user mode, you need to do everything in the following order (proceed to the next solution to the problem only if the previous one did not help):
- Clear temporary files of the 1C program.
- Try logging in with another user.
- Test using sql.
- Try to transfer to another computer (maybe it's in the PC you are using).
Little conclusion
Despite the popularity and ubiquity of the 1C program, there are some flaws in the system. If various errors occur, you can resort to the "Instructions for working in the program 1C", which is present in any version of the program. In most cases, you must press F1 to call the instruction. Then you will be able to find the information you are interested in in the 1C directory.