Router D-Link DGS-1008D is designed for the implementation of computer networks of entry and middle level. Moreover, information in this case can only be transmitted by wire. At the same time, his speed is at a sufficient level, and the pricing policy is democratic. It is to this model of communicator that the review offered to your attention will be devoted.
Specialization
As noted earlier, it is most optimal to use such a switch to create computer networks of the entry or middle level. 8 ports for such purposes are simply excellent. Moreover, the topology of the network being implemented is a “star”. Again, the lack of the ability to configure this device from a software point indicates that its center will be passive.
The main area of use of the communicator in question is offices. Moreover, both the smallest and the average level. The only limitation in this case is the number of ports. There are only eight of them. One of them is used to receive information coming from the Internet. Therefore, the maximum number of computers in such a wired segment should not exceed seven system units.
Equipment
The D-Link DGS-1008D delivery list consists of the following items:
- Communicator.
- Power supply for the implementation of the power supply of this device.
- An extended user guide that describes the parameters of the router and how to configure it.
- Warranty card.
Parameters
According to the user manual, the D-Link DGS-1008D model router has the following technical specifications:
- Eight universal ports RL-45. Moreover, the speed of information transfer through them can be 10, 100 or even 1000 Mbps.
- Automatic switching on all ports of the device.
- Possibility of data transmission both in half-duplex mode and in bidirectional.
- The built-in Green D-Link option is designed to maximize the energy efficiency of this router.
Customization. Procedure
The D-Link DGS-1008D is configured as follows:
- Carefully remove this router from the shipping packaging.
- We glue the legs, which are included in its package.
- We install at the place of operation and bring communications.
- We install wire connectors in the device ports. Moreover, there are no restrictions in this case. You can use any free connector.
- The power supply plug must be plugged in. The wire from it, at the end of which there is a plug, is connected to the corresponding socket of the communicator. Turn on the network system.
- After that, the device will automatically configure. All elements of the wired network will receive automatic addresses. The system is fully configured without user intervention.
Cost
Now such a switch is estimated at 1600-1700 rubles. 8 ports, as previously noted, allow you to create even a mid-level computing network on its basis. Therefore, such a cost is justified. This is a functional communicator with advanced technical specifications.
Reviews
The D-Link DGS-1008D switch is characterized by the owners and specialists only on the positive side. It is a very reliable device. In the process of its operation, problems almost never arise. In addition, its setup is very simple. Even a novice computer specialist can cope with this operation.
In addition to everything, it has a very affordable price tag. Another plus of this router is its high transmission speed, which can be 1 Gb / s. This is exactly how this communicator model is characterized in reviews.
Its only conditional minus is the impossibility of implementing a wireless network on its basis. But for these purposes, you need a router with an appropriate transmitter. The device described in the article, the manufacturing company refers to the line of communicators. Routers are initially devoid of such an opportunity.
Conclusion
As part of this review, the D-Link DGS-1008D modification router was considered. Of course, he cannot boast of premium parameters. But its characteristics are quite enough for the creation of computer networks of the middle level, which may include up to seven system units. This is the main direction of its use today.