When using the iron, clothes, especially synthetic ones, can be burned. As a result, the thing and the sole of the iron are spoiled. This could be due to improperly selected ironing temperature or poor quality clothing material. Every housewife needs to know
how to clean the iron from burnt fabric, so that it lasts for many more years. In this article, you will learn about what home-based methods can do this.
Iron Cleaners
Special liquids and cleaning pencils are available for sale, allowing you to quickly and efficiently remove all dirt, rust, scale deposits from the ironing sole. But often they are not at hand when they are most needed. How to clean the sole of the iron from home remedies? In the arsenal of the hostess there will always be soda, salt, vinegar, paraffin, helping to remove dirt from work surfaces. Here are some ways to help housewives:
- Spread a blank sheet of white paper on the table. Sprinkle regular salt over it. Iron this sheet with a hot iron. The dirt should come off easily. Wipe the sole of the salt residue with a soft cloth. To enhance the cleaning effect, grated paraffin can be added to the salt. But if the iron has a Teflon coating, then using this method is undesirable.
- Before cleaning the iron from burnt cloth, you need to heat it to maximum temperature. Synthetic pollution should begin to melt. When it is almost gone, iron the terry cloth to remove any residue. If the iron has a non-stick sole, the burnt cloth can be scraped off with a wooden spatula. The remaining stains are washed with soda mixed with a liquid dishwashing detergent. Wipe the cold sole with such a composition, then with a damp cloth to remove residues. It will be necessary to dry the surface with a rag.
- It will not be possible to get rid of rusty spots on the sole as well as to clean the iron from burnt fabric. It comes in handy table vinegar, which is in every kitchen. If there is ammonia in the home medicine cabinet , then it will go into action. Mix it with vinegar in equal proportions. Dampen a cotton ball with the composition and wipe the ironing surface of the iron. It is not necessary to heat the device during cleaning.
- In order to get rid of the scum inside the water container, you need to prepare citric acid. Before you clean the iron inside, pour water with a dissolved bag of lemon into it. Set the appliance to maximum steam. After 10-15 servings of steam are released, pour the remaining liquid into the sink. If the iron has a self-cleaning function, descaling can be done automatically.
It is possible to remove pollution immediately after its formation if you smear the hot sole with laundry soap. The cooled iron is wiped off of residues. It is always easier to prevent contamination than to clean it. Consider the labels on the clothing labels when choosing a temperature, iron through a cotton cloth. We hope that from this article you learned how to clean the iron from burnt cloth.