Clever Geek Ideas

How to set up an ASUS router with your own hands.

Let's talk about how to set up an ASUS WL-520GC router with your own hands. The configuration of most devices of this class in this manufacturer is no different. Therefore, this guide applies to other models. Special problems with the software layout of such devices should not arise.

Setting up the ASUS router.




Here is a list of all external communications of this device:

  1. 4 RJ 45 ports for wired LAN.
  2. Universal USB port for connecting a printer.
  3. Round connector for supplying voltage from the power supply.
  4. RJ 45 input connector for communication with an external network segment.
  5. Mounting location for installing the antenna.

On the front panel there are the following indications:

  1. Power (PWR LED).
  2. Indication of the operation of the air network segment (AIR LED).
  3. ( WAN).
  4. 4 .

ASUS WL-520GC, :

  1. – EZ Setup.
  2. – Reset.
  3. - Power.

. . . .   ().





asus router.




Before setting up the ASUS router, you must perform the following manipulations in the toolbar (this will significantly simplify and speed up the configuration process; the sequence is valid for the Windows 7 operating system.

  1. We click on the “Start” menu and in it we select the sub-item “Control Panel”.
  2. Next, you need to reconfigure its appearance in the "small icons" by clicking the appropriate button on the toolbar.
  3. Select the item "Network and Sharing Center."
  4. We go to the tab “Change adapter settings”.
  5. We call the context menu on the adapter’s shortcut and select the “Properties” item.
  6. In the window that opens, remove the support for IP version 6 and be sure to install support for the 4th.
  7. Next, double-click the left button on the line of the 4th version and in the window that appears, set the automatic receipt of the IP address and DNS server.
  8. Accept changes.
  9. Disconnect the connection by right-clicking and then turn it on in the same way.

How to set up an ASUS router.




Power is supplied to the ASUS network device. The router should boot. After the download is completed, we launch any browser that is installed on the PC. In its address bar, enter the address 192.168.1.1. A window will appear asking for your username and password. Usually they are indicated in the instruction manual, and the most frequently encountered option is the login and password “admin”. Next, in the process of how to configure the ASUS router, go to the menu item "IP Config"and select "WAN & LAN". Then we set the “WAN Connection Type” parameters: the value “PPTP” and “Choose WAN Bridge Port” should be “NONE”. Then we set the parameters for the address, DNS server, encryption and access (this information is provided by the provider). Then go to "Wireless" and select "Interface". Here the name of the future network is entered, the encryption method is selected, the security key is indicated. Then you need to save the changes and exit the browser.

The article describes the configuration of the ASUS router of the WL-520GC modification. The complete sequence of actions during this procedure is shown: starting with a visual inspection of the case and ending with the installation of program parameters. This algorithm is valid for all devices of this manufacturer, it can be used everywhere.



More articles:


All Articles