The motherboard is the main element of the PC on which the entire system is based. All components are connected to it. Therefore, it is so important to understand how to find out the name of the motherboard so that there are no problems when upgrading the system. There are several ways to do this.
About motherboard
Before you learn how to view the properties of a computer on Windows 10 or any other OS, you need to understand what it is for.
The motherboard is the basis for the construction of modular equipment. The platform contains the necessary elements that would help the computer perform tasks.
Like any component, the motherboard can have different manufacturers and be of different models. Therefore, choosing a new component, it is necessary to understand compatibility. To do this, you will have to understand how to find out the name of the motherboard.
Motherboard Elements
The platform has the basic elements and those that the user uses to operate the system. On the motherboard, you can see the connectors for the CPU and RAM. Important elements are microcircuits: the south and north bridge. There is also a bootable ROM, bus controllers and their extensions, as well as a large number of ports and interfaces for connecting third-party devices.
In a ready-made system, the motherboard must have a processor, at least one RAM module, if necessary, a video card and via SATA connected HDD. Also, some users can connect a sound or network card. Although almost all new platforms have built-in components for sound and Internet connection.
PC specifications
How to see the properties of a computer on Windows 10? The easiest option: go to "My Computer", click RMB on the free area and select "Properties". Next, there will be data on the chip, the amount of RAM used, the type of system and its version.
But for many, this information is very small. To get information about a new computer, you need to look into the system even deeper. The easiest way is to install additional software that collects all statistics about the PC. An excellent program is AIDA.
This versatile tool helps to collect not only information about the motherboard, but also about other details. The software collects data about the CPU, RAM, hard drive, video card and platform. Moreover, the data is so deployed that most ordinary users do not even understand what is at stake. But to find the necessary information among the many numbers and names is not difficult.
Motherboard definition
How to find out the name of the motherboard? This question is quite common, because even in the case of self-assembly, the user may not know which board is installed inside the case. Therefore, when there is a need to upgrade a PC, update BIOS or software, to cope with system problems, you have to urgently look for the name of the platform.
In this case, there are several ways to help deal with this problem. Some of them are very simple, others require certain knowledge from the user. Among the main options for determining the platform of a new computer are:
- Visual inspection
- Information in the BIOS.
- Using built-in system utilities.
- Third party programs.
Visual inspection
This option is the simplest and, it would seem, the first that comes to mind. But usually it is used at the very last moment, since many users are too lazy to turn off the computer, get out the case and open it. But anyway, so you can see firsthand the name of the model and manufacturer.
To do this, you must turn off the computer, if it is turned on. After you need to turn off the toggle switch on the back of the case. Next, you need to disconnect all devices that are connected to the PC. To get rid of excess electricity on the board, you need to press the computer’s power button several times, and then hold it down for a few seconds.
Now you can open one of the side covers of the housing. It all depends on which side the platform is screwed to. Where to see the name of the motherboard? Usually it is displayed on the board in white capital letters. Therefore, it is difficult not to notice it. Usually it is enough to carefully examine the board to notice the inscription. She does not have a specific location. Typically, the manufacturer places it on the free space of the platform.
Next, you can take a picture or rewrite the name to find the full description of the model on the Internet. But what if the computer is not new, and for some reason the inscription is poorly distinguishable or completely erased?
BIOS
Next, we can turn to the Basic Input / Output System. It is he who loads information about the motherboard at the beginning of the loading of the system. To do this, you must restart or turn on the PC. A screen will appear during bootup. At this point, you can click the Pause button on the keyboard. The screen will freeze so that you can review the necessary information.
In this case, the user may encounter a couple of problems. For example, it is likely that the motherboard Gigabyte or another manufacturer will be displayed only with the name of the brand under which it came out. The rest of the data cannot be obtained. In this case, you can try to switch to BIOS.
Each platform has its own setting of which buttons are responsible for certain functions at boot time. Therefore, after turning on, you need to carefully look at the screen to find a combination or button that will help you switch to the BIOS.
But here the user may encounter some problems. For example, in older versions of BIOS, information about the platform is very rare. Only the manufacturer can be specified. If an updated version of the software is installed, then there is a high probability of finding the necessary data. In addition, there will be no problems with this, since there is already a Russian localization of the service.
Embedded Utilities
If the previous two options did not give a result, you need to try to find out the name of the motherboard. How to do this using the built-in Windows utilities? You need to use the command line. You can also use msinfo32. The latter option will help to get more advanced information about the system.
Command line
This is the first option that will help to understand the name of the motherboard. Depending on which operating system is installed, certain combinations or names of this option must be used.
For example, in Windows 7, just enter “Command Prompt” in the search bar to open the corresponding service. In the 10th version of the operating system, the name of this option was changed to Windows PowerShell. Therefore, you need to enter this name in the search.
The motherboard name can be obtained from the command line using the wmic baseboard get product command. It will be enough to press Enter. Thus, you can find out the name of the platform.
But the problem is that this command does not provide data about the manufacturer. To get them, you have to use wmic baseboard get manufacturer. Thus, you will receive both the brand under which the platform is released and its model.
System Information
Then you can use the built-in service "System Information". It helps to collect information about the platform and its components. This method helps users of the Windows 7, 8, and 10 operating system.
First you need to call the necessary dialog box. To do this, use the combination Win + R. Win is a button on the keyboard with the logo of the operating system. You can also enter “Run” in the search and open the desired dialog box.
To get information about the motherboard of Gigabyte or another manufacturer, just enter msinfo32 without quotes in the string. Next, click OK.
A lot of information will appear in a new dialog box. What should I look for? On the line “Manufacturer” and “Model”. Usually, the necessary information about the brand of the platform and its model is displayed here. For more information, you will have to go to third-party software.
Data in DirectX
Thanks to this resource, it is also easy to obtain the necessary data about the system. To do this, use the Win + R key combination and enter dxdiag. This opens the “DirectX Diagnostic Tool”.
The first tab “System” will display all the information about the PC. First, the time and date will be indicated, as well as the computer name. After that, information about the operating system is displayed: version and bit depth. Below is the language of the system. But after this line, information about the motherboard is displayed.
The computer manufacturer is the platform manufacturer, and the model is the motherboard model. Below there is data regarding the BIOS. Information about the processor, memory, swap files, and the DirectX version are also listed here.
Programs
If the information on where to see the motherboard on the computer did not give the necessary results, you can install an auxiliary program. Such utilities are very useful for the system. They can be used not only to collect information, but also to diagnose the system. Many of these programs help to collect information about errors and either offer solutions or solve them yourself.
Utilities:
Speccy
This is a simple and intuitive utility that immediately provides information about the platform on the main screen. The program provides information about the operating system, RAM, video card, processor, drive and motherboard. But the data here is the main one, so for advanced statistics you need to go to the appropriate section.
By selecting “Motherboard”, the user will learn about the manufacturer, model, version. There is an extended data on the north bridge: manufacturer, model, and revision. The same data is collected regarding the south bridge. The system temperature is shown below. So all information about the motherboard socket is here.
Speccy provides BIOS and voltage data for each element of the platform. You can immediately see the number of interfaces on the board. The program can be installed from the official site.
AIDA64
Perhaps the most popular program that helps to collect all the data about the system. She was previously known as Everest. This software is not free, but even its trial version will provide an opportunity to find out all the statistics of the system. Including helps to find out the model of the motherboard.
In order to collect the necessary information, just go to the "System Board" line. It contains information about the properties of the platform, its model, data on buses and memory.
CPU-Z
This is a small software that is free. In general, it is designed to collect data about the processor. But, in addition to this, you can find out information about the motherboard and RAM.
To find out the name of the platform, you need to go to the Mainboard tab. The motherboard manufacturer in this case will be indicated in the Manufacture line, and the model in Model.
MacOS Information
But Windows is not the only system on which a PC can be based. Many users work with Apple products. In this case, you can also try to find out the name of the motherboard.
To do this, find the data on the serial number. Having received the necessary numbers, you should go to a special resource. But first you need to find out the serial number. To do this, go to the PC menu "About This Mac". At the very bottom, you will notice the serial number. It needs to be scanned to further identify the platform.
Now you need to go to the Powerbook Medic website. Here you need to enter the serial number in the search bar. The site will give all the information about the system.
In Parts (components of the PC) you need to find the line Logic Board. The platform model will be indicated immediately in the first column.