For those who write a lot or work with documents, it is often very important that there are no blots on paper. Therefore, one of the most sought-after office supplies is now the corrector. This is a tool for glossing over errors. When using it, a notebook or document will look clean, without blots. There are several different types of correctors. Their choice may depend on the purpose of use. One of the most sought after is the corrector pen. It is easy to put in a pencil case or bag and carry with you.
What are correctors?
A text corrector is a device with which you can easily correct what is written or printed on paper. The most demanded such stationery are high school students, students, office workers. The corrector allows you to accurately correct the error, after which there are no blots in the document, and the abstract will look flawless.
The first corrector was invented in the USA in the middle of the twentieth century. One typist - Bett Nesmith - came up with a white fluid with which you can gloss over mistakes. On this she became famous, and then founded a large clerical company. The correctors were a white liquid that dries quickly after application to the paper. It solidifies with a crust through which no error is visible. Above this white trail you can write the correct letter or word.
Varieties of proofreaders
At first, these stationery was just a liquid, which is applied to the mistakes with a brush. Now this kind of variety is also common. Such proofreaders are sometimes called the "stroke". In addition to the brush, a foam roller can be used to apply the liquid.
And recently, correction pens and corrective tape have become increasingly popular . They are more convenient for glossing over small errors, less noticeable on paper. The tape generally refers to dry proofreaders, since you do not need to wait until it dries, you can write on it right away.
Correction knob: general characteristic
When applying correction fluid to the paper with a brush, a very thick mark usually remains. In this way, it is inconvenient to cover up small blots, for example, if one letter or even part of it is spelled incorrectly. Therefore, corrector-pens were invented. In them, white liquid is supplied through a thin metal or plastic tip. Therefore, it is very easy to perform spot correction of the error.
Such devices are a pen that can be thick or even shaped like a regular one. Its body is made of soft plastic and is filled with correction fluid. It hits the paper through a thin tip. There are two options for supplying fluid. In the first, you need to put a little pressure on the tip. Part of it will go inside and open the outlet of the liquid. Another option is more convenient - it repeats the principle of operation of a conventional ballpoint pen.
Types of Correction Fluids
Both liquid correctors and handles use different liquids. Usually this white mass is a low molecular weight polyvinyl chloride. It can be dissolved in various chemicals: trichlorethylene, titanium oxide or barium sulfate. Three types of correction fluids are distinguished depending on the basis.
- Water-based pens are more popular. Such correction fluid is safe, non-flammable, odorless. Therefore, it is most suitable for schoolchildren. But water-based liquid dries slowly, can soak thin paper. It freezes at low temperatures, but its advantage is that when the tip dries, it can be soaked with water.
- Alcohol-based pens are more in demand among students and office workers. After all, such a liquid dries quickly, making it possible to immediately resume work. In addition, it does not freeze at low temperatures. Its disadvantages include its quick drying inside the handle if the cap is loosely closed, a sharp unpleasant odor, and the danger of ignition.
- Recently, oil-based stationery pen correctors have appeared. They combined all the advantages of previous models, but are still rare.
Corrector pen: how to use?
Such devices are more convenient, the liquid in them is consumed more economically, minor errors can be glossed over. But many have a question about how to use such a corrector correctly. It can take the form of a regular pen or a thick felt-tip pen. But they have one principle of action. Inside is a metal ball that helps stir the liquid and prevents it from drying out. To do this, shake the handle in a vertical direction before use.
Then lean the tip of the corrector to the place you want to cover. The simplest models act like a regular ballpoint pen. Others need to be squeezed a little so that the fluid begins to flow to the tip. For this, the body of such handles is made of elastic thin plastic. In some models, you need to press the tip slightly so that it hides in the case. This opens the way for correction fluid.
After use, the handle must be tightly closed to prevent the corrector from drying out.
The most common models
Pen corrector is now one of the most common office supplies. All well-known companies producing such products produce many models. There are some of the most common that are popular because of high quality, ease of use and low prices.
- Erich Krause corrector pen is considered the best. Many users trust this company. Reviews note that such a corrector has virtually no shortcomings. It is odorless, beautiful in shape, convenient to use. The metal tip does not scratch the paper, allows you to apply the corrective fluid pointwise. This arctic white correction knob is also called because of the snow-white color.
- BRAUBERG proofreaders are also popular. They are distinguished by a stylish design, a convenient tip and a soft body that allows you to easily squeeze out correction fluid. And the metal ball inside does not allow her to freeze.
- Many users choose low-cost proofreaders. These include InFormat products. Despite the low cost, they are of high quality, odorless, and the liquid dries quickly.
You can select any corrector pen. If you know how to use them, then no errors in the text will be scary. They can easily be glossed over with a quality corrector.