A watch is an attribute that exists in almost every person. This is not just a useful thing. It is also a stylish decoration, an addition to your image. In a word, an accessory, the acquisition of which you do not have to regret. But what to do when your battery is dead? How to solve this problem? How to change the battery in a watch yourself if you do not have such an experience? How not to damage the mechanism?
How to change the battery in a watch? Do I need help from a wizard?
So where to start? As a rule, people are used to contacting specialists. Of course, this is the easiest option. Masters know very well how to change the battery in a watch. However, you can cope with this yourself. The main thing is to know which battery was installed by the manufacturer. By setting exactly the same, you guarantee the mechanism a long service life. You need to look at the type of battery. The abbreviation SR indicates that the battery is silver-zinc. CR is lithium. These batteries are the most durable. Most often they are used by manufacturers.
Knowing how to change the battery in a watch yourself, you can avoid installing a cheap alkaline model, denoted by the letters LR. Unfortunately, unscrupulous masters sometimes do this. Such batteries do not last long. In addition, they weakly hold tension in the mechanism. As a result, the watch starts to lag quite quickly.
Remove the back cover
Of course, battery models are very convenient. They do not need to start. But a battery is not an eternal thing. Therefore, it has to be changed over time. There is absolutely nothing complicated in this procedure.
So how to change the battery in a watch? It all starts with the removal of the back cover. It can be pressed in or twisted. In the first case, a special recess is provided on the lid. A small screwdriver is inserted there. The lid is gently hooked and removed. At this moment, the main thing is to hold the watch tight.
If on the back cover there are several recesses in a circle, it must be unscrewed. This is easiest to do with a caliper. The tool is inserted into two recesses, and the cover, turning counterclockwise, is carefully removed.
Change the battery
What next? How to open a watch to change the battery is clear. After this, you need to find the battery, remember how and in what position it is fixed. It is important not to reverse the polarity of the installation.
The battery is removed with a small tweezers, and a new one is inserted in its place. The main thing is that it should be of the same design and specification as the old one.
When installing the battery, do not take it by hand. It is best to use the same tweezers for this. After installation, you must check whether the clock is running. Only after that the cover comes back into place. In a word, nothing complicated.
Put the cover in place
So, the final stage. If the cover is twisted, it must be screwed up using a caliper. Do not forget also that if a gasket was installed in the watch, you need to monitor if it has become unusable. Otherwise, it must also be replaced. If the exact same gaskets could not be found, you can use a little sealant, applying it to the threaded part.
The pressed cover is placed in the watch back on a flat surface. It is necessary to make sure that the groove corresponds to the axis of the wheel of the change in the position of the arrows. After that, a small flat object (preferably wooden) is taken, located on the lid and gently pressed down from above. She should fall into place without any problems.
Thus, knowing all the nuances of how to change the battery in a watch (Casio, Oreintex or any other company), you can easily cope with this task. And, most importantly, do it quickly and correctly.
be careful
It is important not to forget about accuracy. If you damage the mechanism, then you can already not save your watch. For example, when removing the cover, hook it very carefully. The clock must be well fixed, and the tool must be pressed precisely and firmly. By the way, these measures are also necessary in order not to get hurt.
When changing batteries, remove and insert them as carefully as possible. Tweezers should not touch important elements. In a word, caution is needed in everything.
When closing the lid, carefully check the watch for leaks. If you still don’t close it when you press it with a finger, use, for example, a wooden mallet used to crush berries, potatoes, etc. This way you can immediately apply pressure to the entire surface. As a result, the case will be completed.
However, if you are still not confident in your abilities, you can always easily find a place where you can change the battery in your watch quickly and without problems. Conscientious good masters will certainly be found in every city.