Alas, even the most modern models of irons, which can be seen in household appliances stores, are prone to such misfortunes as carbon deposits. It would seem that this is so? But in fact, soot can cause your favorite things to go bad: get dirty and even burn through. Agree, not a very pleasant prospect. That is why it will be useful for you to find out how to clean the iron at home.
Option number 1. Salt
Salt is the simplest and most affordable way to clean the sole of the iron, because it will be found in every home. It can be used in several ways. The first is to sprinkle salt on a thick sheet of paper. Then it is necessary to heat the iron strongly and drive it along the sheet until the carbon deposits completely disappear. Another option is to collect a little salt in gauze or other porous soft tissue, and then rub it with the contaminated area. An even greater effect can be obtained by preheating the iron a little. You can put salt directly on the sole of the iron. In this case, you need to rub it strongly with a coarse, slightly dampened cloth. When the carbon deposits come off, you should treat the iron with a dry cloth. However, it should be remembered that this method will help to eliminate only small pollution. And the use of salt is categorically not suitable for Teflon-coated irons.
Option number 2. Vinegar
How to clean the iron if salt cannot be used? There is another remedy that can be found in every home. This is vinegar. If the coating is insignificant, it will only be enough to moisten a rag or cotton swab with vinegar, and then rub “place X”. If the contamination does not lend itself, try mixing vinegar with ammonia. Such a composition can only be cleaned with a cold iron. If this still does not help, put the appliance on a rag moistened with vinegar and do not touch it until the morning. During this time, the coating should soften. To completely get rid of it, it will be enough to rub the sole with a rough cloth vigorously. But this is not a complete list of how to clean the iron.
Option number 3. Paraffin candle
You will need, in fact, the paraffin candle itself , as well as a dense cotton fabric. We wrap the candle in a rag, and then we begin to wipe it with an iron, which must be preheated before that. Consider that from high temperature paraffin will begin to melt. Therefore, carry out all manipulations with the iron in a special tray, keeping the device at an angle. This is especially important for irons equipped with a steam function - paraffin clogged in the holes can ruin your things. After the cleaning is finished, you need to remove the remaining paraffin and dirt from the sole.
Option number 4. Indelible pencil
Special chemical pencils can now be bought in many stores. This is one of the best tools to quickly solve the problem called "How to clean the iron?" First of all, warm up your unit well. Then you need to rub the base with a pencil. After some time, a chemical reaction will occur. The plaque softens as a result, and it can be removed with a soft, dry cloth. When the unit has cooled down, wipe the sole with a slightly damp cloth. Do not be alarmed by the unpleasant odor - it is formed due to the presence of ammonia in the composition of the pencil. Substances released during the reaction are completely safe for humans.
Option number 5. Hydrogen peroxide
The last tool from the category "How to clean the sole of the iron?", Which is worth telling about - hydrogen peroxide. Just moisten a piece of cotton wool and wipe the surface of the iron with it. If the pollution is very strong, you can take nail polish remover or acetone. But you need to work with them very carefully, since both means can damage the plastic elements of the device.
As for which sole of the iron is better in terms of cleaning, here the mistresses have been preferring those made of stainless steel for many years. They are much stronger than ceramic or aluminum, and carbon deposits move away from them faster.