How to connect Dualshock 4 to a PC: tips and instructions

The best gamepads are joysticks from game consoles. They are convenient to use, and therefore attract players. True, the time of consoles is almost over. They were replaced by computers and virtual reality glasses. On a PC, you can very successfully use the joystick. The main thing is to know how to configure and connect the device. Sometimes you have to try pretty hard. Today we will find out how to connect Dualshock 4 to a PC. The simplest tips and tricks will help even a novice user quickly cope with the task.

What is required

So, what is required to connect Dualshock 4 to a PC?

That everything worked without failures and malfunctions, it is recommended to prepare:

• gamepad
• a computer with a working operating system;
• standard USB cable or bluetooth adapter;
• Xpadder, InputMapper or DS4Windows gamepad emulator
• drivers for the joystick.

The process only seems difficult, but it is not at all. Especially when it comes to connecting a gamepad wirelessly. Even a novice PC user will be able to get Dualshock 4 to work properly on a computer.

Wired connection

I wonder how to connect Dualshock 4 to a PC? The first way to solve this problem is to use a wired connection. It will require a USB cable with a MicroUSB connector.

To connect Dualshock 4 to a computer, do the following:

1. Install drivers for Dualshock 4.
2. Initialize the gamepad emulator. Without this application, the joystick may malfunction.
3. Insert the USB cable with one side into the existing gamepad and the other into the USB slot on the PC.
4. Press the button to turn on the game device.
5. Wait for the device to synchronize, and then start the joystick emulator.

Everything is ready! Now it remains to configure the device control using the emulator. Just a few minutes - and the job is done!

Without wires

But this is far from all possible ways to solve the problem. Thinking about how to connect Dualshock 4 to a PC, some find wireless synchronization quite convenient and simple. Moreover, the absence of extra wires will make the gameplay as convenient as possible.

Want to connect the Dualshock 4 joystick to a computer or laptop? Then the gamer will have to follow these steps:

1. Charge the gamepad. For the wired method, this is not necessary - the power will come through USB.
2. Insert the USB controller into the USB connector on the computer. If Bluetooth is integrated in the PC, no additional adapters are required. Simply activate the mentioned function in the OS.
3. Turn on the joystick.
4. Install drivers and emulator. Run the last one.
5. Press the PS and Share buttons on the controller.
6. Release the controls after the lights on the gaming device start flashing.
7. Open bluetooth on a computer, search for new devices for synchronization.
8. Select Dualshock 4 from the list that appears.
9. Confirm sync.

At this stage, the direct connection of Dualshock 4 to the PC can be considered complete. You can customize the gamepad to your liking and enjoy the gameplay.

Important: sometimes the system requires a password for synchronization. You must specify a simple combination as a password, for example, "0000".

Device setup

How to connect Dualshock 4 to a PC, we found out. Another fairly important step in working with the joystick is to configure it. To cope with it is not difficult, even for a novice user.

Earlier it was said that to implement ideas, special applications are used - emulators. For example, DS4Windows or InputMapper, which has a similar interface.

To set the control of the gamepad through this application, you need to proceed as follows:

1. Run the emulator and connect the joystick.
2. Go to the "Configuration" tab.
3. Click on the commands in turn, and then on the buttons of the gamepad. So the user will set each key its specific action.
4. Save changes.

In emulators, you can save settings as templates. For example, to quickly switch when changing the game - it is very convenient. To do this, at the top of the application there is a "Save" button, which is located near the name of the created profile.

Conclusion

We figured out how to connect Dualshock 4 to a PC, we also figured out how to configure this device. Now, every gamer will be able to enjoy playing at the computer, imagining that he actually plays on the console. For example, you can optionally connect a PC to the plasma for a greater effect.

Can there be crashes and malfunctions while running Dualshock 4? Yes, but as a rule they happen quite rarely. Usually it’s enough to update the drivers and reconfigure the buttons of the game device.

Serious problems with the synchronization of Dualshock 4 more often occur on Windows 10. This operating system may be incompatible with the gamepad. In this case, it is useless to deal with the problem - only changing the operating system will help.

As you can see, the proposed operations are very easy to learn. True, for games on the PC, many prefer to use the "native" gamepads for Windows. They do not require additional configuration and manual installation of drivers.