Many housewives who are used to comfort and automated work will not be able to do without a blender in their usual life. Thanks to him, you can make smoothies, mashed potatoes, cocktails and much more. Quite often, a blender is compared with a combine, for such statements there really is reason. However, nevertheless, the last described device in functions greatly overtakes.
Choosing a Hand Blender
Looking for a blender (Polaris - one of the most common companies) submersible type, you should pay attention to some determining factors:
- Material. Its quality and characteristics greatly affect the cost of the device, however, the more metal there is, the better, accordingly. It is desirable that only the handle turn out to be plastic.
- Power. It is worth paying attention to devices whose engine characteristics are from 300 watts. Otherwise, the functionality of the technique will decrease significantly. The higher this indicator, the better the device will work.
- Nozzles. Creating her blenders, Polaris made sure to provide its customer with the maximum number of various nozzles. Their presence affects the final cost, so you need to think carefully.
- Speed. Often they are from 2 to 15. It is best to purchase an option with three or more speeds.
Equipment
All Polaris blenders from the factory come in a standard box made of cardboard. Her color scheme is very impressive. On the surface is a drawing of a blender and its parts. Moreover, it contains brief characteristics that may interest a potential buyer.
Special cardboard tabs help protect against mechanical stress, etc. Inside, everything is folded neatly and easily, even the buyer is able to arrange everything correctly. Unfortunately, Polaris blenders are not equipped with a handle for transportation, but their weight allows its absence.
Accessories
If we consider the model of the blender, called the PHB 1036AL Titan, then it is worth mentioning about its accessories. The most important part of the device is the handle, in which the electric motor is built. It has a small weight due to the fact that it is made of metal and plastic.
The whipping nozzle and whisk are also made of plastic, but stainless steel elements are found. At the same time, the blender seems weighty and of high quality at the initial inspection. But the whisk seems too flimsy.
The knife, according to the manufacturer, has a high level of strength and sharpness. A similar effect was achieved through the use of special equipment.
Trying to understand how to disassemble the Polaris blender, you need to pay attention to the bowls that are in the device. They, together with a glass, are made of plastic. The difference in the material lies only in its certain characteristics. For example, a bowl is much stronger and more durable. According to reviews, as well as tests by curious bloggers, the glass is really weak and does not last long.
Nozzles and their work
In order to make sauce, mashed soup, mayonnaise and other dishes, you must use a device such as a blender. Polaris, reviews of which are quite good, is a household appliance with additional nozzles. Thanks to this, the functionality of the blender is significantly increased.
A chopper, for example, cuts vegetables, meat products, cheeses. If you carefully read the instructions, you will notice that it is not intended for ice and coffee chopping. A whipper in a matter of minutes will turn proteins, sour cream and other products into a good thick foamy mixture. But whipping butter and margarine is not recommended.
- A standard nozzle is needed in order to do the elementary tasks that any blender copes with. In this case, it is better not to fill the dishes with more than 500 ml.
- The whisk will allow you to beat eggs, proteins, dough, desserts. At one time, it is better to take no more than 4 eggs and 400 ml of cream.
- The chopper will help to deal with onions, cheese, garlic, almonds and other products. Onions and cheese instructions allow you to take no more than 150 g, and meat - 250 g.
Repair of the Polaris blender
The most common problem is a dull knife. When buying a new one, it is better not to think about an independent replacement, but still the consumer expects three scenarios, depending on the model of the device.
- In the event that the bowl is not disassembled, then a complete replacement is made of both the knife and the gland.
- Sometimes, to remove the knife and replace it, it is necessary to disassemble the bowl. Typically, such models are rare, but still come across. In any case, it is necessary to renew the oil seal that grabs the spindle.
- The most common option is a separate knife replacement when you do not have to change other elements. For the safest removal of the old knife, it is necessary to cover it with a towel or rag and twist. You need to rotate in the opposite direction from the usual one - the thread is left. If the knife sits tightly with the help of nuts, then special tools (wrench or pliers) will help. In this case, make sure that the device is turned off from the network. As you can see, disassembling a blender is quite easy.