Any site, even the most comfortable and tidy, will look unfinished if it does not have any, even a small, reservoir. Water acts on any person in a soothing and relaxing way, it’s nice to relax and dream at the pond. If the means and size of the site allow, you can make a fairly extensive pond and run fish there. It is so nice to sit with a fishing rod after a working day or on a weekend, and then enjoy a fresh and fragrant ear! As everyone already probably guessed, the topic of this article will be the construction of a reservoir using PVC film.
PVC film for a pond is, you can say, the middle ground between cheap plastic film and expensive butyl rubber, but its quality is much superior to the first and almost not inferior to the latter. It is not difficult to work with the film, but a certain accuracy is required (the film is all the same!), Compliance with some rules and the sequence of work when arranging the reservoir.
Stages of the construction of a pond on the site
- The choice of place. A pond is a closed ecosystem with natural cleansing. You can install filter pumps, but, again, for large water bodies, but for now we are talking about a small, low-cost place for rest. The pond should be located in a place protected from the wind and the bright sun so that leaves and fallen fruits from the trees do not fall into it.
- Excavation pit. Since we are talking about the construction of a pond using a PVC film, the pit can be made of any size and shape, manually or mechanically. The size and shape of the future pond depends on the size of the site. In a small area make a small pond, better than an arbitrary shape. The vast area provides more opportunities for the manifestation of imagination and creativity.
Sand gasket . Sand should be distributed with a thickness of about 10 cm, this will protect the waterproofing materials from mechanical damage.- Laying geotextiles. Geotextile is a non-woven material that consists of polypropylene fibers. It is used to ensure tightness, is resistant to destruction, withstands temperature fluctuations from - 60 ° C to + 100 ° C. It will provide extra protection for PVC film.
- Laying waterproofing material. In this case, it is a PVC film for a pond.
To determine the amount of film that will be needed, measure the length and width of the rectangle into which you can fit the prepared foundation pit. The width of the film web will be equal to the width of this rectangle, to which the depth of the pond, multiplied by 2, plus another 1 m, should be added. This margin is necessary for firmly fixing the ends of the waterproofing on the shore. In exactly the same way, the material length is calculated. PVC film for water bodies is connected by hot welding or glue.
6. Filling with water and registration of the coastal zone of the reservoir. Water should be changed twice a year. At this stage, everyone can feel like a landscape designer and create a recreation area where it will be calm and comfortable. Of the plants suitable irises, reeds, hosts, astilbe, swimsuit, catchment and others.
Acting on such a plan, you can create a very nice pond on the site. It should be noted that the PVC film for the pond is an environmentally friendly material. It tolerates frosts well, does not rot and is resistant to damage. In ponds arranged in this way, fish live beautifully. If you think that making a pond is expensive and troublesome, then your solution is PVC film. Butyl rubber coatings can be used for the pond, they are more expensive, but with a longer service life (up to 50 years due to their ductility and strength). They are suitable for creating ponds of arbitrary shape with a raised bottom and steep slopes. If you just want to make a small oasis of water, the best solution is PVC film for the pond and your skillful hands.